Customer Questions and Answers for Cooktop, Ceran (Blk) by Whirlpool

Hello Greg. 1. Unplug range or disconnect power. 2. Pull the range out of its mounting location so that you can access the side trim. 3. Remove the control panel from its subchassis, and set it on the subchassis. 4. Remove the two screws from the left and right side trim. Do not remove the trim at this time. 5. Raise the cooktop and prop it up. 6. Loosen the left and right tension bracket screws and remove the brackets from behind the side trim. 7. Remove the wire clip from the left side trim. 8. Pull the left and right side trim off the cooktop. To remove the trim, lift it away from the cooktop glass, and pull the back off the rear trim. 9. Lower the cooktop. 10. Lift the front of the cooktop glass, pull it forward from under the rear trim, and remove the glass from the cooktop. IMPORTANT: When you reinstall the cooktop glass, keep the side edges of the glass inside the four alignment tabs (two on each side). If the glass WP8190780 is over the tabs, it could break when you lower it. Hope this helps.