Timothy B February 06, 2019 for Model Number 66514043K010 Dishwasher runs but dishes are not clean, tablet is not dissolving. Has touch/graphic display and ran service diagnostics and 2 errors came up (all others are pass): 1) Fill - Current sensing circuit does not detect flowing to the fill valve during filling intervals. This could be caused by a faulty control, fill valve, or wiring. 2) Diverter - Diverter position sensor detects that the diverter motor is turning when it should be stastionary. This is most likely caused by a faulty control board. So, I should replace WPW10195344/AP6016757? That should be the problem with more than a single error I would guess?
1 Answer Timothy, Yes with the 2 different errors this will most likely be caused by a faulty control board on the unit. Read More...
Dale C January 14, 2016 for Model Number 665.13973K015 The machine runs too long for the setting. For example: setting of Normal ran for 12 hours. The setting for one hour ran for five hours. The control board was replaced yesterday. I have have a service provider out four times, and the ones I have talked with do not know how to remedy the problem. So what could the problem be other than a faulty control panel?
1 Answer Hello Dale. Make sure the unit is heating properly. If so, the sensor WPW10705575 is bad and will need to be replaced. Read More...