Joanie K. January 09, 2021 for Model Number WFC150M0EB3 1 yr old stove. Stock 8" burner takes forever to boil water! Is there a higher wattage replacement? Our altitude is only 1,000"
1 Answer Joanie, check and make sure the element is properly seated and secured to the receptacle for proper transfer of heat/power. The 8" elements are rated at 2150 watts and 1,000 ft altitude shouldn't affect the heat or operation of the element(s). "Some consumers have also reported longer high-heat cooking times, such as the time to boil large volumes of water. This is normal operation for current coil heating elements and is not an indication of problems with the coils." You may want to try this, as a test. place 2.5 qt of water in a sauce pan. water temperature needs to be 70 dgrs.F. Cover the pot, select the hi heat setting. It should take 8.5 to 9.5 minutes to bring the water to a slow or medium boil. Thanks, Read More...
Marianne January 12, 2020 for Model Number CVE4270W Jenn-Air Electric Cooktop Are there any surface elements (6" & 8") that will fit this model along with drip pans? When I enter the model number CVE4270W, these parts do not show up as being available any longer (cooktop is 23 yrs. old). The non-Jenn Air "universal" replacement element that I had purchased does not sit flat in the opening. Still usable but I would prefer to have a flat sitting element. Any ideas on a compatible replacement?
1 Answer Hello Marianne, the manufacturer has discontinued those elements, no substitutes are showing as available. The only recourse is to use the elements you have now. Read More...
John February 25, 2019 for Model Number Jenn-Air C 201 I have Jenn-Air C 201 model and I need two 8” and two 6”surface element but the new ones have what is call reinforced delta frame will it work on 1984 C201? Also need the drip bowls.
1 Answer John, The 6 " element that will work for you unit will be WPY04100165, the 8" element will be WPY04100166. Read More...
Charles December 25, 2016 for Model Number JED8130ADW What elements do I Need? Need two six and two eights.
1 Answer Charles, The 6" element is part number WP660532 and the 8" element is WP3191454. Read More...
Cece March 25, 2016 for Model Number Jenn-air rangetop #89890 Need 6 and 8 in. Burner element replacements. What are parts # and still available? Model #89890 jenn air stove top
1 Answer Hello Cece. You will need to order WPY04100166 and WPY04100165 for the elements needed. Read More...
Mike C November 11, 2015 for Model Number Jenn Air Range 3350 My downdraft electric cooktop, probably dated 1970s, has one faulty 8" element, it is two prong, round and flat. Are any elements available that can be used as a replacement? I also need to replace 2 of the 6" drip bowls and need to find out which ones may be compatible. Thank you
1 Answer Hello Mike. The model number will have to be verified on the units I.D. tag since the one listed came up invalid. This will be necessary to look up and specific parts such as the one you requested. Thank you for your patience and understanding in this matter. We will need your model number to help you with this. Please call 1-877-477-7278 or post your model number with a new question on the parts page. Here is a link to help you locate it. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Tina September 25, 2015 for Model Number c202 I need an 8 inch replacement burner element for my c202 jenn-air stovetop. The connections on the old one is flat. Thanks
Carol February 16, 2015 for Model Number 2300ERS I need to replace my JennAir cooktop electric elements. The replacement elements show a hoop at the end. My elements are flat at end. Any way I can find a replacement?
1 Answer Carol, the 6" burner listed for your model is part number Y707727 and the 8" element is part number 708097. Unfortunately, these parts have been discontinued with no further replacements or cross references available and our company is unaware of any other available sources. Sorry about that! Read More...
Daniel July 30, 2014 for Model Number D140 I would like a new plug in grill for my range. What grills fit this model?
Kathy February 21, 2013 for Model Number A301 I need a replacement surface element for a jenn-air cooktop model 301- it looks like part Y04100166 would work, but it says it's not compatible. Any suggestions? Thanks.
1 Answer Kathy, model A301 is a JennAir griddle. We will need the cartridge or cooktop model number to verify the correct surface element used on your unit. Thank you. Read More...