Clare July 17, 2019 for Model Number JES9900BAB I inserted the heating element that you sent me and my Jennaire Oven And am wondering which is the best way to check to see if the temperatures are correct for baking in my oven.
1 Answer Hello Claire,the manufacturer's recommended temperature test uses a remote reading electronic temperature meter, the temperature sensing tip is placed on a rack in the middle of the oven cavity and the oven is set for a bake cycle at 350 deg. The oven will cycle the heating elements and the highest and lowest temperatures are recorded for 3 cycles then the temperatures are added and averaged. That will give the true temperature reading. While this seems complicated it actually is not and you can use just a tested or known to be accurate thermometer in the oven. Unfortunately, most store-bought dial-type thermometers are usually not accurate. Read More...
1 Answer Hello Gayle. The model number will have to be verified on the units I.D. tag since the one listed came up invalid. This will be necessary to look up and specific parts such as the one you requested. Thank you for your patience and understanding in this matter.We will need your model number to help you with this. Please call 1-877-477-7278 or post your model number with a new question on the parts page. Here is a link to help you locate it. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
1 Answer Terry, each square grid the element sits on represents one square inch. According to that it is approximately 19" X 20 ". Thanks! Read More...
1 Answer Hello K. Yes, you can install the bake element WPW10310274. Make sure the power is off before replacing the element. Hope this helps. Read More...