Dan September 22, 2015 for Model Number Jenn Air SEG196 What are the specs on the Bake Element? Specifically, if I take an Ohms reading with a multimeter what should it read? With the Bake Element removed, oven plugged in and the Bake mode selected on I read 120 volts on my multimeter with one terminal on the red wire and the other on ground. Likewise, I read 120 volts with on terminal on the white wire and the other on ground. However I get not voltage when one terminal is on the read wire and the other on the white. Is this correct?
1 Answer Hello Dan. The ohms will vary, it is best to test it for continuity. It should read closed if good. As for the voltage, with the oven in bake mode, you should have 240 volts ac. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...