Skip to Content
  • 2 Day Quick Delivery! 2 Day Quick Delivery!
  • 365 Day Return Policy! 365 Day Return Policy!
  • 15 million satisfied customers 15 million satisfied customers
  • Over 2.1 Million Parts In Stock Over 2.1 Million Parts In Stock
  • Repair ForumFree Tech Support!
  • Google Trusted Store Google Trusted Store

Customer Questions and Answers for Range Grill Heating Element by Whirlpool

Best Seller
Manufacturer Part
4.89 (64)
By: Whirlpool
Part Number: OEM18033963
Manufacturer Part Number: WP7406P229-60

This is an electric heating element designed for the built-in grill module on a range or cooktop. It provides radiant heat for indoor grilling functions. Replace this element if the grill is not heating, heating unevenly, or if the element shows visible damage such as cracks, burn marks, or breaks in the coil.

More
$156.52
Compare At:
$186.26
You Save:
$29.74

IN STOCK
Ships Today Guaranteed
Add to Cart

Questions & Answers

For Whirlpool Range Grill Heating Element (Part Number: OEM18033963)

1 Answer

Hello Jimmie. No, the part needed Y707709 has been permanently discontinued by the manufacturer and we don't know of any source or replacement for the part.

Read More...

1 Answer

Hello Tony. I'm sorry but there are no instructions for this job in print. Basically, you will have to remove the unit from the installation so it can be opened to access the wiring. This is done by removing the screws around the perimeter and inside the openings that retain the main top to the unit. Once opened, simply place the wiring in the same configuration as originally and be sure they are properly connected. Of course the re-assembly is in the reverse order.

Read More...

1 Answer

Gene, You will want to check to see if there is power getting to the grill element. If there is power then the element will be faulty and if there is not power then the issue will most likely be in the infinite switch.

Read More...

1 Answer

Hello Herb, I'm sorry but there are no instructions for this job in print. Basically, you will have to remove the unit from the installation so it can be opened to access the wiring. This is done by removing the screws around the perimeter and inside the openings that retain the main top to the unit. Once opened, simply place the wiring in the same configuration as originally and be sure they are properly connected. Of course the re-assembly is in the reverse order.

Read More...

1 Answer

Hello Joe. No one is showing the 2 elements crossing over. They do look like they are measuring the same. However, we can not recommend it if the manufacture does not recommend it. Sorry.

Read More...

1 Answer

Hello T.J., To replace the element, you will need to turn off the power to the unit and verify the voltage is off before beginning. You will then remove the two screws retaining the element and the screws retaining the control escutcheon. The wires will need to be traced to the infinite switch to replace it. Be sure to note the wiring connections before unplugging, (a picture with a cell phone works great). You may need a short piece of string to pull through with the old wires and use it to pull in the new wires.

Read More...

1 Answer

Gene, To replace the burner you would need to lift the cooktop from installation. You will have to remove the vent grill and remove the screws holding the down draft to make it easier, then lift out from the cabinet and remove the screws around the perimeter to get the glass top off. Once off you will have access to the burners to replace.

Read More...

1 Answer

Hello Chuck! Unfortunately, the suggested elements for your model has been discontinued with no further replacements or cross references available. Our company is unaware of any other available sources and can not suggest that either of the two inquired parts will work on your model. 71003237 is a 240v grille element, unfortunately, we do not have the wattage. Sorry about that!

Read More...

1 Answer

Hello Kyle, the element is approximately 8 inches wide by 17 inches long. If you will provide a complete model number, I can determine if this part is right for your unit. Thanks!

Read More...

1 Answer

Hi Jim. Remove power. Remove grill grates. Remove grate rocks. Remove center vent grill. Use a stubby Phillips screwdriver to remove all inside (side mounted) Phillips screws. Lift the top assy. off the burner LT. and RT. boxes. Unhook the wires. Unscrew the burner stud nuts. Part # M0282005. The grill burner is part # WP7406P229-60. The rock plates are part # 74011338. Infinite switch is part # WP7406P229-60. Thank You.

Read More...

Have questions? Ask our pros!

Contact us in a way that is convenient for you

Call us 1-877-477-7278
Need Help? Chat with a Pro
Or ask a question by filling in the form

Share your thoughts with other customers

Ask a Question
  • Over 2.1 Million Parts In Stock Over 2.1 Million Parts In Stock
  • 2 Day Quick Delivery! 2 Day Quick Delivery!
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Google Trusted Store Google Trusted Store