1 Answer Hello Jerry. You will press in on the clip and drop down the housing cover. Then you will unscrew the old water filter and screw in the new filter EDR4RXD1. After installing the filter, you will need to run about 2 gallons of water through the dispenser to remove any air in the lines. Hope this helps. Read More...
Gary January 01, 2012 for Model Number Maytag MFI2067 Correct water and ice filter part number and how does it install? Thank you
1 Answer Hello Gary. EDR4RXD1 is the correct filter. Open the door and press the tab on the housing and drop down the cover on the filter housing in the top of the unit. The twist counterclockwise to remove the old filter and install the new filter in reverse order. Hope this helps. Read More...
Jim December 28, 2011 for Model Number mfi2569vew2 How do I reset the light after I change the water filter and do I have to shut the water off before I change the filter?
1 Answer Hello Jim. No, the water does not need to be turned off to replace the filter EDR4RXD1. After replacing the water filter, press and hold Reset Filter or Filter Reset (depending on your model) for 3 seconds. The Order and Replace indicator lights will blink and then go off when the system is reset. Hope this helps. Read More...
Regina December 13, 2011 for Model Number GI5SVAXVLOO Is Filter # AP3177254 the correct replacement filter for Whirlpool refrigerator #GI5SVAXVLOO?
1 Answer Hello Regina. No, based on the model number EDR4RXD1 is the correct filter. Hope this helps. Read More...
Steve G. October 11, 2011 for Model Number MSD2352Ke What is the correct water filter to replace the UKF8001AXX filter that came with the Matag refrigerator?
Donald D. September 12, 2011 for Model Number KFIL27cxmso When do I change the water filter? There is one orange bar left on the display. Thank you, Don.
1 Answer Hello Don! Here is what is stated in your owners manual: "Replace the disposable water filter when the water filter status display changes to “REPLACE.” The REPLACE (red) icon will blink and an alert beep will sound one time after water is dispensed. If water flow to your water dispenser or ice maker decreases noticeably, change the filter sooner. The disposable water filter should be replaced at least every 6 months depending on your water quality and usage." Your water filter is part number EDR4RXD1. Hope this information helps you! Thanks! Read More...
Donna C. August 25, 2011 for Model Number UKF8001AXX So if your replacement filter 4396395 doesn't work what are we supposed to do? I've already returned one to Lowes because it won't let the water valve open to let water flow freely into the filter.
1 Answer Hello Donna! Unfortunately, we do not have any further recommendations available if your product accepts the UKF8001AXX/UKF8001 filter. You will have to contact the manufacture for further assistance regarding this matter. Good Luck. Read More...
Donna C. August 24, 2011 for Model Number UKF8001AXX This was the original filter number for my Maytag Ice20 refrigerator. Apparently this has been replaced with Whirlpool #4396395. this new filter doesn't let water flow. I just spent $200 to have lines and valves replaced with no change. When we took out the NEW filter and put in the plug it worked fine. The repair man showed me that inside after you peel off the foil seal there are 2 wings that when you twist the filter in are supposed to open the water valve. The wings on the new filters are not tall enough to open the water value-you can see the difference in the filter and plug. Do you have old Maytag filters we can buy?..
1 Answer Hello Donna! Unfortunately, we do not have any of the original UKF8001AXX filters available. We only have the replacement UKF8001 filters available. Our part number is EDR4RXD1. Sorry! Read More...
Suzanne W. July 09, 2011 for Model Number JFC2089HES Original Question: When I replace the water filter in my Jenn-Air refrigerator, the water pressure decreases dramatically. I've tried several new filters. Suggestions? Your Answer: HI Suzanne. Are there any kinks in your water line (behind your fridge)? The water valve you need is part # AP4433819.Try these suggestions. Thank- you. New Question: There's not a kink in the water line because when we remove the water filter, the water flow is excellent. Any other suggestions?
1 Answer Hello Suzanne, the correct water filter for this unit is EDR4RXD1. After you install the water filter, you should atleast run 1 gallon through the water dispenser to purge any air in the system. Have you done this after installing the correct filter? Read More...
Suzanne July 07, 2011 for Model Number JFC2089HES When I replace the filter in my Jenn-Air refrigerator, the water pressure decreases dramatically. I've tried several new filters. Any suggestions?
1 Answer HI Suzanne. Are there any kinks in your water line (behind your fridge)? The water valve you need is part # WP12544124.Try these suggestions. Thank- you. Read More...