Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Customer Questions and Answers for Hinge Assembly by Whirlpool

Best Seller
Manufacturer Part
4.89 (64)
By: Whirlpool
Part Number: OEM18032226
Manufacturer Part Number: WP7106P045-60

Questions & Answers

For Whirlpool Hinge Assembly (Part Number: OEM18032226)

1 Answer

Hello Ed. Yes, since the side panels have to be removed to replace these, you will need to uninstall the oven. Thank you.

Read More...

1 Answer

Doan,

If the door is not closing then the hinge will most likely be the issue. To replace the hinge you will have to slide the unit out, should not have to slide all the way out, but enough to access the hinge on the side of it. Once the door is removed you would remove the screws holding the hinge and they should just slide out.

Read More...

1 Answer

Hello Duf,
For serial number 20 and lower, you will need to order part number WP7106P045-60. This unit will have to have the body side removed to access the door hinge unless you can reach it through the drawer opening.

Read More...

1 Answer

Hello Tom.
1. Turn off power to the unit at the circuit breaker. 2. Remove oven door, see “Door Removal” procedure. 3. Remove screws securing wall oven to cabinet. 4. Remove unit from cutout... more position and place on a protective surface. 5. Remove screws securing back cover to chassis and remove. 6. Remove screws securing top cover to chassis and remove. 7. Remove screws securing appropriate side body panel to chassis and remove. 8. Remove screw securing side insulation retainer to rear of oven chassis. 9. Grasp upper back portion of the side insulation retainer and pull outward to remove. 10. Remove the top and bottom screws securing hinge assembly to the front of the oven cavity. 11. Remove the hinge assembly from the unit. 12.Reverse procedure to reinstall oven door hinge

Read More...

1 Answer

Karen, there is a series change within the door hinge assemblies. What is your appliance serial number? We will need this to verify the correct part used on your appliance. Thanks!

Read More...

1 Answer

Hi Hoss. The hinges are replaced together for an even pull on the door open and closing. Hinge part #WP7106P045-60 are separately. It is the correct part # hinge for your unit. Thank You.

Read More...

1 Answer

Hi Susan. You should be OK from shutting the gas off. You may be able to un bolt and slide the entire hinge assy from the front or the oven cavity. Only if you have to wrestle this unit w/ 2-healthy men. Prepare it to slide out level to the hole and support it with a solid stools (plural), remove the sides and then have side access to the hinges. Best wishes. Let us know if we can assist further. Thank you.

Read More...

Have questions? Ask our pros!

Contact us in a way that is convenient for you

Call us 1-877-477-7278
Need Help? Chat with a Pro
Or ask a question by filling in the form

Share your thoughts with other customers

Ask a Question
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google