Eric P. July 11, 2017 for Model Number MFW9700SQ1 I need the door hinge (wp8181843) for my washer. It is unavailable everywhere. Do you have a cross reference to another part or will a different hinge work in place of this one?
1 Answer Hello Eric, I'm sorry but this part WP8181843 has been discontinued by the manufacturer and no satisfactory substitutions have been provided. Thank you for your patience and understanding in this matter. Read More...
Michelle April 09, 2016 for Model Number WFW8300SW02 We have a small leak while the wash machine is washing clothes coming from bottom of door. Running and eventually dripping onto floor. Could this be because the bellow needs to be replaced or a loose front wash machine door.
1 Answer Michelle, This would most likely be caused by a bellow that is bad and would need to be replaced. Read More...
Christine H July 04, 2015 for Model Number GHW9400PW0 My washer door hinge is sagging and rusted, also I am missing the hinge cover, along with the bottom trim part has broken because of the door sagging on it. Can you please tell me all the parts I need to order to repair it all? The washer runs like a Champ...no need for a whole new washer. Whirlpool Duet, Model # GHW9400PW0, Series #CSR3606635. Thanks so much!
1 Answer Christine, With the door hinge sagging, you will need to get the door hinge WP8181843 and the frame W10163308 which unfortunately has been discontinued by the manufacturer with no suitable replacement available. Read More...
Barb March 02, 2015 for Model Number GHW9150PWO Do you offer a door reversal kit? for my model, I see there is one for my dryer. Thanks, Barb
Robert D February 26, 2015 for Model Number GHW9300PW4 Washer sometimes doesn't drain completely and if you open the door water runs out. Could this be from overloading the washer?
1 Answer Robert, You would want to remove the lower kickpanel on the front of the unit. You will need to pull the cap and filter out of the drain pump and look for clogs. This would be the most likely cause for this issue. Read More...
Norbert July 04, 2013 for Model Number gwe9250pwo hi i have this dryer and i whant to know if i can connect it straight to 240 voltage or do i have to move any switch thanks
1 Answer Norbert, as long as you have a 240 VAC, 60 hz, 30 amp, 3 or 4 wire outlet, and double breakers in the breaker box, you won't need anything else, other than a matching power cord. Read More...
Lois March 23, 2013 for Model Number GHW915OPW1 Where can I go to get step by step instructions to change the door hinge?
1 Answer Lois, We do not have printed instructions on how to replace the door hinge for the unit. When you remove the door from unit, you will want to take the screws on the inner door out. Once out you will be able to disassemble door by taking the inner panel off. Once off you should be able to take the hinge out. Read More...
Henry December 19, 2012 for Model Number GHW9400PW1 Have a broken door hinge on my washing machine, which part number should I order?
Ronald Stephen November 24, 2012 for Model Number WFMB3200UC Bosch Nexxt Inspiration I have a Bosch front loading washer and the hinge broke. The Model number is WFMB3200UC, Serial number 856030084125004543. Where can I buy a hinge? Thank you, Ron.
1 Answer Hello Ron, order hinge part# 00651004 and if you need the white hinge cover plate 00491626 you can order that as well. Thanks! Read More...
Debbie September 13, 2012 for Model Number duet front load When I close the and hit start nothing happens. All lights come on but nothing else. An outside piece fell off the hinge side so I was wondering if the hinge may have something do do with the door not making correct contact or something.
1 Answer Hello Debbie. If the latch assembly is not working correctly, the unit will not operate properly. You need to check the latch and make sure it is working properly. Read More...