Whistle Pants March 25, 2012 for Model Number GS6SHEXML00 Which model ice maker will fit my model refrigerator? My ice maker stopped producing ice cubes and needs replacement.
1 Answer Hello! According to your model the replacement icemaker is part number 2198597. Thanks! Read More...
Andy January 21, 2012 for Model Number Kenmore Fridge 106 74259402 Which Model will replace defective Acceler-ice unit?
Bob W. January 15, 2012 for Model Number GT22DKXGW00 Makes plenty of ice but shutoff arm does not raise to curtail ice making.
1 Answer Hello Bob. Based on the information you provided, it sounds like the icemaker W11700559 is bad and will need to be replaced. Hope this helps. Read More...
Mike December 31, 2011 for Model Number et19dkxdw03 Which ice maker kit do I need to purchase for this whirlpool model? Thank you
1 Answer Hello Mike. Based on the model number, W11700559 is the correct add on kit. Hope this helps. Read More...
1 Answer Hello Jim. No, based on the model number D7824706Q is the correct icemaker. Hope this helps. Read More...
Doyle November 29, 2011 for Model Number Manuf # 8560 Can anyone help me??? I have a Roper Refrigerator up/down Model #RT18DKXKQ00, equiped for Icemaker, but never had one installed, will the #8560 meet my needs, if so can I use either copper line or plastic line to connect to my water source? Can I connect to my water heater somehow, I think some one might have done it in the past? Thanks In advance...Doyle
1 Answer Hello Doyle. Yes, you can use the icemaker kit W11700559 in the model you provided. You can use the water line kit PT25 for the hook up, but it needs to be cold water coming to the icemaker. Hope this helps. Read More...
Sabu November 04, 2011 for Model Number EB21DKXDW01 Will this Ice maker assembly fit this model whirlpool (EB21DKXDW01) and are there any other parts needed?
1 Answer Hello Sabu! Yes, the icemaker assembly W11700559 is the correct assembly used on your model. You will also need icemaker copper tubing to hook up the refrigerator to your home, part number TJ9CIMKIT20. Thanks. Read More...
Fred September 29, 2011 for Model Number 253.68972 Will this AP3122341, Manufacturer's Number: 8560, fit Kenmore 253 series as an add on? If not which one does?
1 Answer Hello Fred. No, based on the model number you provided, IM34 is the correct icemaker kit. Hope this helps. Read More...
Greg September 25, 2011 for Model Number ET18PKXGW0 1 Will this work on the above Whirlpool top freezer? Thanks
1 Answer Hi Greg. The question is, can your unit adapt? OK- look in back, behind the cover on the RT. lower corner. Do you see a 2-prong connector pre-wired for the water valve? Look up at the RT. Rear Top of the cabinet. Do you see a Round taped 2" cover where the fill tube slides into from the back and into the back of the ice maker? Is there capped screw holes in the freezer that will accept the ice maker mounted to the side inside wall? If the answer to these questions (all 3) are yes, then you can use this kit part # is W11700559. Thank you. Read More...
Ray September 18, 2011 for Model Number ap2984633 Can I replace model # ap2984633 with model # eckmf94 or eckmfe21 (icemaker)?
1 Answer Hello Ray! Yes, the icemaker replacement part number 4317943 will work for the add on kit ECKMF94 replacement. Thanks! Read More...