Jlr July 19, 2011 for Model Number mgr5755qdq my range top lights and works my broiler works but my oven igniter glows but no gas and it doesn't light. is my igniter or my gas valve
1 Answer JLR, It's most likely a weak igniter 12400035, not only does it glow, but at the samr time it produces a 3.2 to 3.6 amp draw, and 3.2 to 3.6 VAC at the gas valve terminals. If the glowbar is weak, and does not produce the amps or volts, the valve will not open and release the gas for ignition and flame. Thanks and Good Luck. Read More...
Kkkfkiofpppkigjfl July 19, 2011 for Model Number mgr5755qdq My broiler works, and my range top works, my oven igniter glows, but no gas. So it doesn't light. Is it the igniter or the gas valve?
1 Answer Hello kkkfkiofpppkigjfl. You will need to test the gas valve for 3.0 to 3.4 volts AC with the igniter turned on. If the proper voltage is there, you will need to replace the gas valve 12002604. If the voltage is low, the igniter is weak, and you will need to replace the igniter WP7432P136-60. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps.http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Teri June 10, 2011 for Model Number JGR8875RDS I am unsure just what to disassemble in order to replace my oven igniter. Do I need to take the back off of the stove or just the drawer?
1 Answer Hello Teri! Here is a link from our free repair forum with information regarding the installation process of the oven igniter. Hope it helps!http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/1332-help-instructions-install-oven-igniter.html Read More...