Stephen March 13, 2020 for Model Number KERK807PSS00 The right front burner switch stem has broken. I just need this switch. Do you have this part number?
1 Answer Hello Stephen, I'm sorry but this part W10307362 has been discontinued by the manufacturer and no satisfactory substitutions have been provided. Thank you for your patience and understanding in this matter. The original manufacturers' part number is 9759781. Read More...
Robert August 06, 2018 for Model Number KESA907PSS00 Only the front right single burner switch is malfunctioning. Can I order only only that switch?
1 Answer Robert, per the manufacturer, the individual switches are not available, on in a service kit, part number is W10307362 Read More...
Free Range November 02, 2017 for Model Number YKESA907PS00 I understand that the Infinite Switch Kit comes with a new wiring harness. Must the new harness be installed or can I just install the new switches? If I do need to install the new wiring harness is there a video showing the steps, beyond the switch installation?
1 Answer Free Range, Yes you will want to use the wiring harness and all the switches that come with this infiinite switch kit. Unfortunately we do not have a video specific for this kit but there is a general switch replacement video under this part. Read More...
Kyle November 22, 2016 for Model Number KESA907PSS00 I am a technician and have already put this in a stove. My question is if just one of the new switches goes bad do I still have to buy the whole kit? Because 185+ for one switch is kinda pricey.
Howard August 10, 2016 for Model Number KERA807PSS00 Hey, I installed the infinite switch kit and now nothing works, oven or surface elements. I was careful to match all connections as per instructions and disconnected the purple wire (plastic connector) above transformer. Where should I now look to trouble shoot? FYI clock works. Thanks
1 Answer Hello Howard. You will need to trace all the wires and look for a bad or loose connection. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Howard April 28, 2016 for Model Number Kitchenaid KERA807PSS00 I have one infinite switch which needs replacement, however I understand that due to some modification, the switches are only available as a kit (W10307362) which includes a new harness. I'm am fairly handy and want to know if this job requires any special tools or electrical experience. Is all the work limited to the control panel or are other parts of the range need to be accessed? Thanks in advance for your response
1 Answer Howard, This repair would most likely only require a Phillips screwdriver and possibly a 1/4" hex head to get the screws out and will be a straightforward replacement. Read More...
Lisa O January 01, 2016 for Model Number KERA807PSS00 I work at a resort where we have 10 of these ranges, and a skilled maintenance team. We began to have trouble with some of the burners working intermittently and so replaced the switches and wiring harness in two or three of these ranges. After a month, we started having the same basic issue-- intermittent burner response. I have no idea if the same burners are having the same trouble. We have called an outside tech to have a look but wondered if you have any input in the meantime. Thanks for your help!
1 Answer Lisa, With the units being high usage it would most likely be the switches that are failing with the issue being the same as before. Read More...
Ed November 12, 2015 for Model Number KERA807PSS01 I need to replace 1 infinite switch (dual burner). Do I need to replace the other 3 switches as well even though they work fine? I know the replacement package includes all wiring and the 4 switches. I understand I cannot buy a single dual switch to replace the only defective one.
1 Answer Hello Ed. Yes, you need to replace all switches and the harness in the kit. It has been updated. Read More...
Olga October 18, 2015 for Model Number Kitchenaid range KERA 807PSS00 Hi, Something fell on one of the knobs and broke the little piece inside the knob! Knob is fine. What am I looking for? Please help Thank you
1 Answer Hello Olga. You will need to order and replace the infinite switch that is broke on the unit. Read More...
N January 07, 2014 for Model Number KERA807PSS Help! The terminals on the back of the original range switches look completely different than the new kit. Do I have to replace all the wires leading to the cooktop and all four switches in order to replace one defective unit? Or is it possible to just install the new switch? Thanks!
1 Answer Hello N. Sorry, but the manufacturer suggest all parts in the kit W10307362 to be used in the repair. Read More...