Maria May 03, 2012 I ordered this part for my microwave model #KHHC2090SSS and switched out both bulbs above the stove top and still not working. Although, the cooktop fans still work and everything else, s.a. the display, etc. If the relay board needed to be replaced, would these other things still work? While installing the bulbs, possible to have touch them, but also possible could be a bad pair of bulbs or damaged. Trying to figure out if it's the bulbs, or the board. Your help is appreciated.
1 Answer Hello Maria. Test for power coming to the lamps. If there is none there, then the relay board 8206603 will need to be replaced for the lights to work on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Lisa April 25, 2012 for Model Number KHHC2090SSS microwave I ordered this part for my microwave part # KHHC2090SSS and switched out both bulbs above the stove top and it is still not working. Are they the bulbs? Is there a fuse box I'm suppose to check as well?
1 Answer Lisa, You have orderred the correct cooktop lights 8204670, they are a "halogen" bulb and you should not touch the glass with your hands/fingers, use a small cloth or gloves when you change them. They are rated at 12 volts, and the power supply is applied through the "relay board" WP8206602,located behind the panel on the right side, front of the machine. The relay board does have a " non repalceable" fuse, if there is no voltage applied to the light sockets, and there are no damaged wires, you will need to replace the relay board. Thanks and Good Luck Read More...
Ken July 11, 2011 for Model Number GH6177XPS-3 Can I use another lamp in place of the indicated lamp? The lamps indicated are pricey and dont last very long.
1 Answer Hi Ken. You want to be care full in strictly fowling the manufacturers recommended wattage rating or any replacement bulb.You don't want to touch the bulb with your finger tips. These halogen bulbs will last longer if you handle them with a clean cloth rag. If you need the bulb, it is part # 8204670. Thank you. Read More...
Edith July 03, 2011 for Model Number GH9184XLQ1 Can I use a lamp that is 12 volt and 20 watt in the microwave, or will the heat from the lamp burn up the holder.
1 Answer Hello Edith. You will need to use the bulb the manufacture recommends for the microwave. Based on the model number you provided, 8204670 is the correct bulb. Hope this helps. Read More...
Bob K. April 25, 2011 for Model Number GH9177XLQ-0 for WHIRLPOOL Lamp (Part Number: AP3180923): what is the voltage? what is the wattage? is this a halogen bulb?