John December 30, 2015 for Model Number GH7208XRS1 Part AP3180923 halogen bulb is this a 3 way bulb or does the control board increase the wattage to make it 3 way?
1 Answer Hello Soph, If you could please post a new question and include the model number from the units' I.D. tag, we can look at your units' configuration and advise you properly. Thank you for your patience and understanding in this matter. Read More...
Albert March 30, 2015 for Model Number KHHC2090SSS2 Is this bulb a "3 way" ie low, medium and high brightness - thanks!
1 Answer Albert, Based on the model and part number, this would be the correct bulb for the 3 way bulb. Read More...
Bob March 28, 2015 for Model Number KHMS155LSS4 What's the part number for the lightbulb that illuminates your food as you cook it?
1 Answer Bob, the bulb for the interior of the microwave is part number 8204670. Thanks! Read More...
John January 13, 2015 for Model Number GH9176XM What is the proper replacement bulb number for my model?
Charlie D December 16, 2014 for Model Number sears 66569644992 Is the 8204670 bulb the bulb that lights up the interior of the microwave or is it a light for the buttons on the control module.? I need the light that lights up the "food" as it is cooking inside the unit...
Beau February 19, 2014 for Model Number gh7208xrs1 Lamp part ap3180923 - what voltage are they? Are these made for replacement for my whirlpool convection micro oven?
1 Answer Hello Beau! Yes, the lamp 8204670 is listed for your model and will fit your microwave. This is a 12v 10w bulb. Thanks! Read More...
Scott February 09, 2014 for Model Number KHHC2090SSS-2 Are the bulbs replaced by just pulling them out and pushing them back in with a clean cloth?
1 Answer Hello Scott. Yes, the bulbs in the unit pull out and then you press the new bulbs into the unit. Read More...
Paul September 02, 2012 for Model Number GH7209XRB1 Would it be unusual for both bulbs to burn out at the same time or would that indicate another problem?
1 Answer Hello Paul, Unless there were a power supply or wiring issue to begin with, another problem is doubtful. Read More...
Maria May 03, 2012 I ordered this part for my microwave model #KHHC2090SSS and switched out both bulbs above the stove top and still not working. Although, the cooktop fans still work and everything else, s.a. the display, etc. If the relay board needed to be replaced, would these other things still work? While installing the bulbs, possible to have touch them, but also possible could be a bad pair of bulbs or damaged. Trying to figure out if it's the bulbs, or the board. Your help is appreciated.
1 Answer Hello Maria. Test for power coming to the lamps. If there is none there, then the relay board 8206603 will need to be replaced for the lights to work on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...