Robin A October 25, 2014 for Model Number MDBH750AWB I ordered the latch assembly with handle but don't know how to open the dishwasher door that is stuck closed. Any suggestions? Thank you.
1 Answer Robin, To open the door that is stuck in the closed position you will need to try to get ahold of the outer top corners of the door and lift up and give the door a good jerk. This should allow the door to release from the latch. Read More...
Trevor July 08, 2014 for Model Number MBD7601AWS lights went out on the control panel and upon further review it looks as if the handle to open the unit has broke away from the control pane as well. First it was the lights then the handle and now it wont even run. Thoughts?
1 Answer Trevor, Chances are the door latch assembly WPW10130695 is OK. The failure with the LED's and the no running situation is most likely due to a failed keypad circuit(s) and if the latch has broken away from the standoffs in the control panel, the door switches aren't being activated and the dishwasher won't operate. You'd want to start by replacing the control panel first. Read More...
Scott July 07, 2014 for Model Number mdb6701aww2 Latch was stuck after finally opening the door i realized handle was broke. I've matched the model number with the latch assembly i need but, want the one with the handle so just wanna double check which part number i need before ordering it. Thanks for the Help!!!
Scott July 03, 2014 for Model Number MDB6701AWW2 My door latch was stuck after i got it opened i realized the handle is completely broken from the latch assembly. Which one do i order to get the handle as well i don't think i can use the same handle with the new latch. Thanks for any help!!
1 Answer Scott, The door latch that you would need with the handle is part number WPW10130695. Read More...
1 Answer Bob, the latch only is part number WPW10275768. If you would like the handle and latch assembly use part number WPW10130695. Thanks! Read More...
Diane June 01, 2014 for Model Number Maytag MDB6701AWS1 undercounter dish washer Maytag MDB6701AWS1 I have read all the comments and it seems that the door latch is a common problem. Had I known this I never would have spent all the money getting a Maytag. The door latch is sticking so I am assuming I have to buy the handle and the latch? Your guidance would be appreciated.
Darrell B March 17, 2014 for Model Number MDB6701AWS0 What is the black handle part number for latch W10275768? I bought the latch from local dealer without realizing it does not come with a handle.
1 Answer Hello Darrell. You need to order WPW10130695 for the latch with the black handle. Read More...
Al February 28, 2014 for Model Number mdbh950awb it says in instructions that part number 99002580 latch assembly but without handle in remarks it says to use w10130698 is with handle when I check button for capability it says not for this model is the 2nd. number right for latch assembly with handle for door? I will await your response. thank you Al
1 Answer Al, according to the model number supplied the door latch with handle is part number WPW10130695. Thanks! Read More...
Candlemaker December 20, 2013 for Model Number mdb6701awb mdb6701awb dishwasher has been working great until door latch broke and the tabs on the back of the control panel that hold the latch are broke too. i replaced only the door latch. the dishwasher will start, sounds like water is going in and stops after about 1 minute and powers down.
1 Answer Candlemaker, Replacing the control panel 6-919822 should solve both your issues. the broken retainers could allow the door latch to shift and release the switch plunger. The dishwasher "shutting down" during the cycle could also be due to a faulty circuit in the key pad circuit(s) causing the control board to "overload" and shut down. Read More...
James October 23, 2013 for Model Number adb2500awb37 I replaced the latch assembly with a new handle also. My dishwasher will start and run for about fifteen mins give or take and then will try to start back up a few times then shut down completely. I can restart but the same thing happens.
1 Answer Hello James. 6-919803 is the control panel for the unit. Based on the information you provided, it sounds like the control panel will need to be replaced on the unit. Read More...