Jess S August 08, 2012 for Model Number Admiral Refrigerator/Freezer HMG 51138 Light burned out. How do I replace it? What do replace it with? Thank you Jess
1 Answer Hello Jess. We will need your model number to help you with this. Please post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
1 Answer Hello Wayne. If the bulb 8009 does not screw back into the socket, you will need to replace the socket on the unit. Read More...
Bill April 16, 2012 for Model Number GS6SHEXML00 The light in fridge is making noise and tries to come but does not. I've got a new bulb and still does not come on. It makes a chattering sound and light blinks ?
1 Answer Hi Bill.The reason the light bulb hchatters inside the fridge unit is because of the relay on the control board by the compressor. Board part # WPW10135090. Thank You. Read More...
Uncle April 01, 2012 for Model Number GSF26C5EXY00 My Whirlpool side by side refrigerator dispenser front LEDs stopped coming on when pressing the water pad or ice pad. By pressing the dispenser light on, dim for lower intensity or off . It appears that the dispenser lights stop working. How can I replace, repair or reset this problem. The light is supposed to automatically light up when the water or ice pad is pressed. Thank you.
1 Answer Hello Uncle, Sounds like you have a bad dispense board WPW10372206 or the power supply on the main board has gone out WPW10356039. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Ann March 21, 2012 for Model Number GX5SHTXTQ00 bottom mount refrigerator I cannot get the bulb out of the socket inside the refrigerator. Is there a special trick to get it to turn and come out? I was thinking there was some kind of release which is for the moisture control? help???
1 Answer Hello Ann. No, the light bulb 8009 unscrews from the socket and sometimes can be tight to remove. You may want to use one of the lid openers that you use on jar lids that are a soft rubber to grip the bulb and remove it. Hope this helps. Read More...
Gary March 15, 2012 for Model Number Amana RSW458P Amana RSW458P Microwave: I'm trying to access the light bulb. I can't seem to find the screw/panel to access the light bulb socket. The manual says: "Upper left hand side of oven back is a metal plate with one screw. Light bulb is behind this plate"....I can't seem to find it.
1 Answer Hello Gary. Are you looking in the cooking compartment or on the back of the unit? It appears to be on the rear of the unit. If it isn't there, you may have to remove the main cover to access it. I hope this helped! Read More...
Connie S. November 13, 2011 for Model Number ASD2522WRBO1 I need the plastic covering that goes over the inside light bulb.
1 Answer Hello Connie! The lens that covers the refrigerator light bulb is part number W11239891. Thanks! Read More...
Seajay October 31, 2011 for Model Number GS395LEGO 3 GAS RANGE How do I remove the glass cover over the oven bulb so i may replace this bulb? Does it twist off or simply pull off or does the bulb go in from the back of the stove? Help please.
1 Answer Hello Seajay. Yes, the lens unscrews out of the socket assembly W11594027. Then you can access and replace the light bulb 8009. Hope this helps. Read More...
Inge October 14, 2011 for Model Number JJW9627AAW The bulb in the lower oven went out. I can't seem to find one which will fit into the bulb cover properly. Any suggestions?
1 Answer Hi Inge. The bulb is part # 8009. The cover is part # WP9781049. Remove power. Remove door. With a flashlight, remove cover and see if the old bulb base is still inside the bulb socket. If so then you will need a pair of needle nose pliers to gently "unscrew" it out. Thank You. Read More...
Tom C. September 25, 2011 for Model Number rsl669t How do I change the light bulb on my microwave? Where is it?
1 Answer Hi Tom. The Cabinet cover has to be removed. The bulb part # 8009. It is located behind the controls on the Rt. rear above a log capacitor. There is a screw that holds the socket mount assy. You can remove to access the bulb completely if this helps. Thank you. Read More...