Jamie March 28, 2016 for Model Number WTW5300VW2 Our washer needs clips that hold the top of the washer to the base like what the top lock does for the dryer. Is the top lock what I need? Does this top lock work for the washer like it does the dryer or do I need a different type of clip? Thanks
1 Answer Jamie, This unit does not use lock clips to hold the top to the base. The main top is held in by screws and to access this you will need to use a putty knife and get under the control panel endcaps to push the push clips. There will then be 2 clips that you would release and then slide the cabinet off and be able to get to the screws. Read More...
Margret September 08, 2013 for Model Number Whirlpool LEQ9508PW1 The latch on the inside of dryer door that connects when door is shut has broken off and now the dryer won't start. What is that part # and how to repair?
Tee May 31, 2013 for Model Number Whirlpool Cabrio dryer WED6600VW0 The clip on the inside of the door that catches a latch to keep the dryer door closed has fallen off. Is this part replaceable and something you carry so far i have not been able to locate this little door clip anywhere.
1 Answer Hello Scott, In reference to the bottom most part or ends of the metal, the long side goes to the front of the machine. Read More...
Margaret January 26, 2013 for Model Number Whitrlpool dryer model LER4434AQO My dryer will not turn on at all. The door will not close completely. Could this be the problem?
1 Answer Hello Margaret. Yes, if the door switch is not closing, the dryer will not run. You need to repair the door on the unit. Read More...
Tom Vinson January 30, 2012 for Model Number LGR8648LWO HOW DO I GET TO THE DOOR SWITCH. DOES THE TOP COVER JUST POP OFF ?
1 Answer Hello Tom. You will remove the lint filter and the screws under it. Then release the clips in the front and raise the dryer top. Now you can access and replace the door switch assembly WP3406107. Hope this helps. Read More...
Judy K. September 27, 2011 for Model Number LEN1000PQ1 I have to pull up on the dryer door before the dryer will start - how do I fix this
1 Answer Hello Judy. Based on the information you provided, it sounds like the door switch WP3406107 may be bad and will need to be replaced. Hope this helps. Read More...
Judy K. September 24, 2011 for Model Number LEN1000PQ1 To start the dryer I have to pull up on the dryer and hold in then push to start or it won't start - what part do I need to fix this problem?