Karmenita May 16, 2014 for Model Number LSR8233EQ1 My washer Whirlpool Stock #LSR8233 E, stop rinsing and spinning .The noise sound like when you try to start an engine cracking . I emailed a few minutes ago ; I forgot to write the model/stock number. Please , help ! The water is not draining. Thank you ! Karmen
1 Answer Hello Karmenita. You need to check the lid switch 3949247V and see if it is bad and needs to be replaced on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
George April 16, 2014 for Model Number PAVT234AWW Maytag Performa on final spin made a crunch noise. I immediately pushed control in and stopped machine. Tried to restart it nothing happenes. It did not empty of water. I did it by hand. Whats broken please?
1 Answer George, You will want to access the pulleys on the bottom of the unit and check the one for the drain pump to see if it will spin and spin freely. It sounds like the bearing may have come out of the pump. Read More...
G. Spangler March 31, 2014 for Model Number GSQ9364HQO Used the agitator repair kit to replace worn dogs and cam but the top part of the agitator seems a bit loose. It works (agitates), but I think it has too much play in it. Can this be fixed? Thanks!
1 Answer Hello G. Spangler. If the unit is working properly, then there is no need to replace any parts. If it is slipping, and the bolt is tightened all the way down, then you may need to replace the agitator assembly on the unit. Read More...
Donna March 13, 2014 for Model Number MVWC300VW1 My washer is a Maytag top loader. It just started not agitating. The bottom of agitator works but the top will not. I thought it was the agitator cam kit but not sure due to that the dogs are still grabbing. My washer spins but does not agitate. It also has a slight noise when trying to agitate...not a grinding sound but just a sound that is not normal (like a whining sound). Don't know if this washer has belts on the bottom...didn't get that far...Any suggestions?
1 Answer Hello Donna. Based on t he information you provided, it is the cam kit 285811 that needs to be replaced on the unit. It sounds like they are not catching like they should be. Read More...
Mike March 09, 2014 for Model Number lxr9245eq0 Top of agitator not working. I took it apart and it needs a cam kit. Your web says I need a medium cam but it is definitely a short one, or is there a modification that you make so that the medium works? Thanks
1 Answer Hello Mike. According to the model number provided, you will need the medium repair kit part# 285811 Read More...
Jennifer March 09, 2014 for Model Number 110 92573210 Hi, I'm needing to repair/replace the agitator dogs on my Kenmore washer: Heavy Duty 70 Series # 110 92573210. Which kit or dogs you sale will work for my washer? Thanks.
Donika March 04, 2014 for Model Number LSR7133KQ1 Please help me. My Model # is LSR7133KQ1 and I can not find a agitator repair kit can you please tell me the kit # I need? Thank you!
1 Answer Donika, your model does not have a repair kit available. You'll need to replace the agitator base W10873800 and/or the extension part number 64210. Thanks! Read More...
Joan March 02, 2014 for Model Number LSR8233EZ1 How do I determine the sixe of the shaft on my washer , sm. med. or long size ? I need to order parts for the upper agitator, but do not know what size the shaft is. Thanks
Bill February 11, 2014 My agitator doesn't have a bolt holding it in yet I still can't lift the agitator out.
1 Answer Hello Bill. We will need your model number to help you with this. Please call 1-877-477-7278 or post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Karen A February 08, 2014 for Model Number LSR7233EQ0 OK, parts have been reinstalled...the auger works (only turns clockwise)...there is some play in the auger laterally...is this as it should be? (after bolt is in and all parts installed etc)