Meredith March 10, 2024 for Model Number A882 Maytag washer dial wont advance to next cycle. It appears timer is NA. Is there a replacement part that is available? Thanks Meredith
1 Answer Meredith,This part has been discontinued by the manufacturer & is no longer available.No alternate or substitute part has been recommended by the manufacturer. Read More...
Christian April 05, 2018 for Model Number LAT9800ABW The machine stopped working and the repair man said it needs a new timer but that part is discontinued. Are there any compatible timers on the market that could work with this Maytag LAT9800ABW model? Your site seems to confirm so with a Whirlpool timer. Thanks.
1 Answer Christian, The timer part number on this unit will be 207371 but unfortunately has been discontinued with no suitable replacement available. Read More...
Scott July 20, 2017 for Model Number A7400 My washer will not advance to the next cycle when I'm washing clothes and I have to manually turn the timer knob to the next cycle. I was wanting to know if I need a new washer timer motor to repair it? Please get back to me when have time.Thank you. Regards, Scott Dugger
1 Answer Hello Scott. If there is power to the timer motor and it does not advance, then you will need to order and replace the timer on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Susie September 15, 2016 for Model Number LAT50005AAW Can you replace the motor in timer switch are do you have to replace whole thing?
1 Answer Susie, You will need to replace the complete timer as the timer motor is not available separately. The part number for the timer is WP22001530. Read More...
John June 27, 2016 for Model Number A612 Washer is skipping spin cycle, but dial does continue to off. But you can put it on spin manually and it works fine. Timer motor? Thank you.
1 Answer John, This issue would most likely be caused by the contacts in the timer and would require a new timer. Read More...
Ken A June 25, 2016 for Model Number LA211 Need instructions on how to install motor on timer. Not sure how to reinstall 2 white plastic actuating levers and the spring wire which popped out. A sketch would help.
1 Answer Ken, Unfortunately we do not have instructions on reinstalling the timer actuating levers and spring wire. Read More...
John G December 19, 2015 for Model Number A612 washing machine does not cycle automatically. You can manually step through all the cycles and it works ok. The cycle dial does not rotate through any cycles ....just stays in one place.
1 Answer John, Replacing the timer motor may solve the problem, but the best bet would be to replace the timer 206225 / 206225 . Often times with a complaint like yours, the problem isn't the motor, it can often times be a broken or worn out gear inside the timer. If you're careful, you can start the washer, as it is running, you can use your finger(s) and toch the timer motor case, if the motor is running you'll feel the vibration from the motor. Read More...
Gray November 30, 2015 for Model Number LAT8600AAW My washer runs through the entire cycle perfectly but will not stop at STOP. It continues to run into the next cycle - refills, etc. until it is manually stopped.
1 Answer Hello Gary, If the contacts in the timer do not stop the unit, you will need to order and replace the timer on the unit. Read More...
Jerry June 30, 2015 for Model Number la510 My washer stopped in rinse cycle and will not do anything. What is most likely the problem?
1 Answer Hello Jerry. You need to check the lid switch and the water valve on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Justis April 10, 2015 for Model Number LAT8500ABQ My washer won't run on any other cycles but rinse and spin. How do I fix it. Is it the timer or motor?
1 Answer Hello Justis. If the unit does both rinse and spin, but no other, it sounds like the timer has failed on the unit. Read More...