Ck October 10, 2011 for Model Number MGR5752BDB When oven is started (hit bake, preheat to 350) the temperature indicates 100 for a second and instantly jumps to 350 with a long beep. Oven will never turn on.
1 Answer Hello CK. Test the sensor 12001655 and see if it is bad. It should read 1100O at room temperature. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Rust W. September 11, 2011 for Model Number crg9700bal When the oven is started it gets up to about 75 degrees, and than will not get hotter, what do I need, the oven temp sensor? If so, which one?
1 Answer Hi Rust. Yes you need the sensor. The correct part # you need is part # 12001655. Oven sensor. Thank you. Read More...
Mike September 01, 2011 for Model Number CWG3100AAE Wall oven Reading F-3 code. Replaced Temp. Sensor, still F-3.
1 Answer Hi Mike. Ohm the wires at the new senser. It should be around 1080 ohms at room temperature. Twist the wires while testing to insure no opens. Is it pligged in correctly? Check the pins on the connector and on the control board. The oven sensor 12001655 is a 3" senser. If you need the 6-" senser this part # is 12001656. Thank you. Read More...
Kenneth L. May 02, 2011 for Model Number 7458XTA I have a Magic Chef gas range with a top oven. The temperature sensor is not working. The sensor in the top oven unit is about 7" long. I assume I would need a sensor and the temperature unit since it seems to be one piece. Several parts stores say it is no longer available. I am looking for the part and part number. Do you have the correct part? The S/N O1C335277474
1 Answer Hello Kenneth. The part number for the thermostat for the upper oven is 7404P088-60. It has been discontinued. Thanks. Read More...