Sam December 23, 2013 for Model Number 106.720421 I Hear the relay click when trying to start the compressor. It will try several times until the compressor starts. When running, the compressor sounds quiet and normal. What do I need to correct the problem before I have a failure?
1 Answer Hello Sam, Remove the relay 819160 from the side of the compressor and shake it. If it rattles, it has failed. Read More...
Tyler September 20, 2013 for Model Number KSRS25QXAL00 Does this kit combine the overload relay AND the start relay? Or overload only?
1 Answer Tyler, The overload/relay kit 819160 is a combination start relay and overload. Read More...
Benjamin June 03, 2013 for Model Number 1069517682 Will part# 819160 replace my factory switch? Constant clicking on and off and motor is overheating. All fans work normally but fridge wont cool, blows warm air out. It seems the switch or motor itself is bad and the switch is the cheapest option. Thanks, Benjamin
1 Answer Hello Benjamin. WP2262181 is the correct part number for the relay for the unit and WP2154697 is the overload. Read More...
Farmer January 12, 2013 for Model Number 198715610 Old Sear chest freezer - compressor runs continually but it does cool. Why won't the compressor shut off?
1 Answer Hello Farmer, If the temperature in the freezer is not maintaining at least 0 degrees or the thermostat [569869] is not reading properly this would be the reason for the unit continuously running. Read More...
Henry K April 30, 2012 for Model Number EEV201XW0 My unit is old. It keeps recycling about every 10 sec. What does the Overload/Start up Kit contain, and will that solve my problem ? Thanks
1 Answer Hello Henry. The overload/relay kit 819160 has the overload/relay combo, wire nuts, terminals, zip ties, and contact grease. Here is a link to our Repair Forum, this is a free service to our customers. Use this link to access the repair for your question. http://forum.appliancepartspros.com/refrigerator-freezer-repair/193358-freezer-fridge-not-cooling.html Read More...
Blanca March 27, 2012 for Model Number Kenmore Freezer 106.8254982 Help! I don't understand how to connect this to the freezer. Our freezer has two blue wires running to the capacitor and one red to the overload relay. Can you please explain in detail?
1 Answer Hello Blanca, The red wire is the "hot" wire. The two blue wires connect to the relay, one on one side and the other on the opposite side. These two blue wires cannot be mixed up. As long as they are connected to opposite sides of the relay, it will operate as designed. Read More...
Ken M. May 24, 2011 for Model Number Ken MOre MODEL 106.7679362 Will this unit plug into excisting holes on compressor and will it be capable of handling the load?? Thanks.
1 Answer Hello Ken! The overload/relay kit 819160 will plug in the same location. The replacement is designed for your unit for handling the compressor. Thanks. Read More...