Nancy July 22, 2023 for Model Number MDBH979SAB0 When the door is closed completely, the dishwasher randomly starts on its own. After cancelling the cycle and draining the machine; the lights will come back on after 5-10 minutes and it will start filling again. If we run a normal wash, the dishwasher will run through the entire cycle (including drying), then restart the wash instead of stopping automatically. We have to leave the door ajar to keep it from running.
Paul April 10, 2020 for Model Number MDB8949SB1 Black I need to order a new control panel as the door handle fell of as the 2 screws on the each end of the panel and the 2 screws holding the door handle have pulled out. the two end screws have part of the female plastic housing that used to be on the door panel and broken off. You would think metal retaining clips would be better then molded plastic on something that gets pulled open. Is the W1081164 the correct panel to replace on this unit?
1 Answer Hello, Paul. According to the model number you provided the control panel P/N is AP5985765. Also check the door handle and the bracket. Thank you. Read More...
Ron December 08, 2019 for Model Number maytag mdb7749wba2 The dispenser won't open, I replaced it with a new one. Still does not open. The dishwasher cycles perfect. What next?
1 Answer Ron, With the dispenser not working then this would be a faulty control board that will need to be replaced. Read More...
Duane October 20, 2019 for Model Number MDB7749SBB3 Can someone confirm the correct part number for the Control Panel on a Maytag dishwasher Model: MDB7749SBB3 ? I have seen two part numbers listed, either #W10811164, or #W10811169. I want to make sure I order the correct part number... Thanks !
1 Answer Hello Duane, for the black unit you will want to order part number W10811164. Thanks! Read More...
Matt June 29, 2019 for Model Number MDB7749SBB3 The mounting screw holes on the control panel are all broken and it basically fell off the door. I ordered panel P/N W10811164. Is this the correct P/N? Should of asked before I ordered, but I need it now. I went ahead and ordered it because of your return policy. What size torx wrench do I need to remove the screws?
1 Answer Matt, the panel W10811164, W10811164, is for your model. The Torx bit needed to remove the screws is going to be a T15. Read More...
Jim May 10, 2017 for Model Number MDBH979SAM0 The ribbon on my control board is corroded and the buttons on the control board work sometimes and sometimes they don't, is this the part I need to fix the problem?
1 Answer Jim, The part number for the control panel on your unit will be W10811169 This will be the part needed for the issue of the ribbon harness corrosion. Read More...
Margo January 09, 2017 for Model Number MDB7749SBB1 Will this control panel W1081164 fit my diswasher MDB7749SBB1. this part is suppose to replace part# W10475784 which I have used on my model before but your compatible tool says the replacement part wont fit my model. Please tell me if it will work!
1 Answer Margo, The W10811164 / W10811164 Control Panel, is the correct part to order and install on the model dishwasher you supplied [MDB7749SBB1]. The part is in stock and available at this time. The AppliancePartsPros.com Compatibility tool doesn't always work correctly, when the manufacturer has revised or "substituted" a part for their product. Thanks, Read More...
Skip June 24, 2016 for Model Number MDBH979SAB1 Removal of the control touch panel. You mention removing the inner screws----are those the side screws one on each side that hold a metal bracket with the control panel or do you mean the screws on the sides of the door that hold the large door panel. Also the panel W1o811164 has a series of white wires with a connector on each end which include the connection to control board. Is it necessary to replace that double sided connector or just plug the new touchpad connector to the old white connector
1 Answer Skip, You may want to remove the outer door panel (as a precaution) it could get scratched or damaged in the process. But you need to remove power to the dishwasher, Open the dishwasher door and Remove the six (6) screws securing the control panel to the door frame(2 screws on each side at the top and the two screws across the top). The control panel will now drop down and be free of the door assembly. The wiring harness will remain connected to the console components.Disconnect the ribbon connector and the wiring harness connectors from the electronic control board. Use a flat bladed screwdriver to depress the holding tabs at the left end of the control board assembly while pulling up. Reverse the procedure restore power and test the dishwasher. Read More...
Andy January 23, 2016 Maytag Model # MDB7749SAB0 /// PN on Touch Panel: W10398665 - BLK /// PN on bad switch board 900883 (Corroded ribbon cable ohms out bad). Is the part in the thread correct to fix my dishwasher?