Darrell July 07, 2011 for Model Number MDB7601AWW After setting the cycle when you push start button it does not start. Is it a defective switch or control panel?
1 Answer Hello Darrell. The first thing you will want to check is the door latch WPW10130695. Make sure it is working properly and the switches are good. If so, you will need to replace the control panel 6-919825. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps.http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Toni July 03, 2011 for Model Number mdb7601aww Control panel is not lighting up. When I push the start button, the sound the of dishwasher starts, but no cycle runs. Do you think it is just the control panel, or both the control panel and electronic control board?
1 Answer Hello Toni. Based on the information you provided, it sounds like the control panel 6-919825 is bad and will need to be replaced. Check and make sure there is power coming to the control board and the board is sending power to the components. If so, replace the control panel. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps.http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Mary July 02, 2011 for Model Number MDB9601AWS We cannot change cycle type and the timer does not show the numbers. Cannot get it to stop at cycle.
1 Answer Hello Mary. Based on the information you provided, it sounds like the control panel 6-919825 is bad and will need to be replaced. Remove the ribbon cable from the control board and make sure it is good and clean. If so, you will need to replace the control panel. Hope this helps. Read More...
John April 12, 2011 for Model Number MDB9601AWB We have power but we can't start the cycle. Is it the control panel?
1 Answer Hello John. Check and make sure the latch assembly is good. If so, then the control panel may be your problem. Hope this helps. Read More...