Customer Questions and Answers for Panel- Con by Whirlpool

Hello Iveta. You will need to use a torx screwdriver.

Hello RJ. No, these are not hard to replace. Here are the instructions from the manufacture. Hope this helps.
Removal
1. Disconnect power to the machine.
2. Remove the Inner Door Panel. (See paragraph Inner
Door Panel removal).
3. Remove PC Board Housing Cover. (See paragraph
PC Board removal).
4. Disconnect Membrane Switch from PC Board.
5. Remove PC Board Base.
6. Lift out Latch Assembly.
7. Remove 4 screws securing Control Panel to Outer
Door.
8. Reinstall in reverse order.