Kim March 28, 2011 for Model Number mdbh945aws Is this control panel made easy to install yourself or will I have to hire a appliance repair contractor?
1 Answer Hello Kim. These are not to hard to install. You will need to disconnect the power going to the unit. Then remove the inner door panel. Remove the ribbon cable going to the control board. Next remove the screws holding the control board in place. Then remove the screws holding the control panel in place. Reinstall in reverse order. Hope this helps. Read More...
Richard March 18, 2011 for Model Number MAYTAG MDBH945AWW3 3 questions please: 1. Symptoms- "Hi Temp Wash", "Heated Dry", "Heavy" and "Delay-2" indicators light when the CYCLE SELECT button is pressed. However, pressing CYCLE SELECT again changes nothing nor does pressing START/CANCEL. Is the key pad more likely at fault or is it the attached circuit board? I also observed that the ribbon cable appears to have a small, brown blemish (chemical splash?) trapped between the outer layers of the ribbon. 2. If the key pad (oval section which appears to be removable from the plastic housing) is at fault can it be purchased instead of the whole panel? 3. Why is the white PANEL-CON higher priced than the other two color PANEL-CONs? Many thanks
1 Answer Hello Richard, the correct control panel for your unit is 6-919833. 1. It sounds like moisture damaged the control panel on this unit, which will explain the brownish residue found inside. 2. The touch pad membrane is not sold separate from the control panel per manufacturer. 3. We offer our parts at a very competitive price. In certain cases we will have to match or beat prices. Refer to our price match policy for further information: http://www.appliancepartspros.com/customerservice/orderhelp.aspx. Hope this helps! Read More...
Linda March 11, 2011 for Model Number MDBH945AWW Does the Panel come with all the inner parts or is this just the outside face replacement. My dishwasher does not turn on and I was told it was the touch pad assembly. Is this picture what I am looking for or is it just the outside of it?
1 Answer Hello Linda! The control panel 6-919833 is the touch pad, it includes the ribbon cable only. For the electronic control board you will need WPW10218822. Hope that helps! Read More...
Vince B March 04, 2011 Does the control panel assembly come with the ribbon jack/wire attached or is it part something else or sold seperatley
Guest February 19, 2011 Start-Cancel does not work...all other options-cycle buttons light will changing panel fix problem
1 Answer Hello, to answer your question yes. You will need to change the control panel to fix this problem. If you have any more questions feel free to ask or search our free repair forum. http://forum.appliancepartspros.com/Thank you. Read More...