Customer Questions and Answers for Detergent Lid Pin by Whirlpool

Don, Instructions are not available for your repair, but heres an excerpt from the APP Repair Forum Posts, that should help you out. "If you're not sure which way the spring goes, remember that the spring should compress (coil) when the detergent door is closed, and uncoil when it snaps open. What I finally figured out to reassemble, that worked: 1) Put the spring and pin on the detergent door, with the spring coiled so the top side of the coils point back (toward the detergent cup) 2) Snap the pin back into its slots, with the spring's square center tab toward the matching base in the dishwasher door 3) GENTLY lift one side of the pin up again, so you have room to use a small screwdriver to push the free end of the spring into the detergent lid, then press the pin back in 4) Repeat (3) with the other side of the pin, and the other end of the spring. Read more: http://forum.appliancepartspros.com/dishwasher-repair/2315-question-about-how-install-detergent-lid-spring.html#ixzz1XwVYz94h'>http://forum.appliancepartspros.com/dishwasher-repair/2315-question-about-how-install-detergent-lid-spring.html#ixzz1XwVYz94h http://forum.appliancepartspros.com Thanks and Good Luck