Curtis H January 01, 2013 for Model Number KUIC15PRXS Greetings: I seem to be having a problem with my drain pump. I noticed that it doesn't always pump out the water even though the reservoir is full (and the big has water in it). I also noticed that (sometimes) when the pump starts it kills power to the rest of the icemaker (i.e. the light goes out and the LEDs flash). This causes the icemaker reset and start the icemaking cycle again (even when ice is on the evaporator). Does this seem like a drain pump problem? Also, do you guys have instructions (i.e. current KUIC15PRXS service manual) to help me replace the drain pump? thanks. -Curtis
1 Answer Hello Curtis, There is not a installation guide for installing auxillary drain pump. What you would need to is pull unit out. The auxillary pump will be held in by 2 - 1/4" screws. Remove screws and disconnect the hoses from the auxillary drain and install the new one. The drain pump 1901A will need to be replaced on unit. Read More...
David S. January 07, 2012 for Model Number GI15NDXXB Whirlpool Ice Maker under counter unit Does this pump come with installation instructions as I will be adding it to a new Whirlpool ice maker and not replacing an old one? Whirlpool recommends this kit if you can't gravity drain the unit. I will be draining into the garbage disposal just like the old GE ice maker I'm replacing with the new Whirlpool unit.
1 Answer Hello David. The pump 1901A should come with instructions on the install. However, you will remove the old drain hose from the unit and install it onto the insert of the pump. Then connect the drain hose from the pump to the drain line. These are not hard to install into the units. Hope this helps. Read More...
Brett December 30, 2011 for Model Number KUIC18PNTS1 I have a kitchenaid ice maker and I am looking for a pump, part #DMD400AWP. Which pump will work for this unit? Thanks, Brett
1 Answer Hello Brett. Based on the model number you provided, 1901A is the correct drain pump assembly. Hope this helps. Read More...
Ricky M. August 01, 2011 for Model Number Kenmore 10689582702 / part #AP3046324 Hi. I have a Kenmore icemaker and it appears that something (animal) has chewed through the drain pump resevoir. Can I buy only this part as the unit functions as it is other than the leak?
1 Answer Hello Ricky! You will need to replace the drain pump 1901A. No parts to this assembly are available separate. Thanks! Read More...
Todd R. June 24, 2011 for Model Number 10689582703 Can you buy just the pump housing for the drain pump part number ap3046324?
1 Answer Hello Todd. No, you will need to order the pump 1901A. They do not offer just the housing. Thanks. Read More...
Rob J. March 24, 2011 for Model Number KUIS15PRHB5 Trying to get a drain pump for a Kitchenaide Ice Maker. Is this a drain pump that will drain the water from the unit? I do not want a circulating pump. Kitchenaide's part # is PS331918 that I need for our home ice maker. Thanks, Rob J.
1 Answer Hello Rob! The drain pump for your Kitchenaid Ice Maker is part number 1901A. Thanks! Read More...