David V. January 18, 2012 for Model Number KUDI01ILBS6 What is correct motor replacement for this dishwasher?
1 Answer Hello David! The motor assembly is part number WPW10757217. You can also purchase the pump and motor assembly W10782773. Thanks! Read More...
Joe F. December 25, 2011 for Model Number KUDPO1FLBL3 My dishwasher started making very loud grinding type of noises then "stopped working" within a few days. The tub fills, nothing happens, and when the cycle is cancelled, it drains. 1) does this mean that I probably need a new motor / pump (AP4434617). 2)The website drove me to this part# for my dishwasher KUDPO1FLBL3 but that model is listed as a Whirlpool and I have a KitchenAid. My guess is that they're the same but I hate to assume when I have to take things apart. Is this the correct part and probable solution? Thanks..
1 Answer Hi Joe. The kitchen aid is the upper end models of a whirlpool. Similar as the Jenn-air is to Maytag. When you hear the grinding noise it is an indication that the chopper blade is getting abused and there is glass or a bone stuck in it. If you get the shop vac and some tools to get into the top of the motor sump area, you may not need a whole assy. Since you are considering total replacement of the motor /sump anyway you will help yourself by cleaning all the wash arms and top filter plates anyway. Just lay out all the parts as you are taking them apart so you know how to reassemble them. The motor is part # W10782773. Thank You. Read More...
Beth December 22, 2011 for Model Number kudm01tjbs0 When turned on the water fills but after a time the spray action does not start. When cancelled the pump starts and drains water. What can be the reason we have no spray action.
1 Answer Hi Beth. Have you been using Dishwasher magic part # TJ104 or Glisten part # W10549845 ? If the inside of the dishwasher pump /sump area and inside filters are dirty, then it will not pressurize. Check the wash arms every month and remove to clean under the sink with a pick tool/ Invert the wash arm and then use a pick tool to remove the debris out of the wash arm jet holes. Then get to the top of the motor and carefully lay the parts aside to be able to reinstall them. Clean, clean ,clean is the issue. Keep removing parts until you get to the chopper blade and inspect parts that may be clogged or broken. The chopper blade is part # W10083957V. Make sure the drain hose is clear at the sink and the sink part also. If after all this it still doesn't work, then you need to replace the motor assy. part # WPW10757217. Thank You. Read More...
Wendy December 16, 2011 for Model Number kuds01ilwh2 How do we reinstall three white tabs when we can't remove dishwasher from underneath the counter. Everything else has been installed from the new motor and sump assembly
1 Answer Hello Wendy. You will need to remove the toe panel and reach around the pump and motor assembly W10782773 and insert them into the slots. These are a little hard to do this way, but can be done. Hope this helps. Read More...
Wendy December 14, 2011 for Model Number kuds01ilwh2 I just ordered the circulation housing and motor AP4434617. I want to make sure it is the right one for my dishwasher. Does it comes with the sump gasket as pictured? Also with what do I lubricate the gasket when I install it in the dishwasher? What other lubricants are used for the motor parts? Thanks
1 Answer Hello Wendy. Yes, based on the model number you provided, W10782773 is the correct circulation pump and motor assembly. You can use a light coating of cooking oil on the gasket to help with the install. Just don't use alot. It is best to install without lubricate if you can. Hope this helps. Read More...
Don September 18, 2011 for Model Number kudpo1flbl1 Does pump assembly : AP4434617 fit my model above? Thank you
1 Answer Hello Don. Yes, based on the modelnumber you provided, W10782773 is the correct pump and motor assembly. Hope this helps. Read More...
Tim W September 08, 2011 for Model Number Kenmore Quietguard 3 - 66516023400 My Kenmore Quietguad 3 is making a loud noise. Can't even hear the TV over the grinding noise. I removed the spray arm and the chopper assembly cover and removed any debris. I put it all back together and it's just as noisy as ever. Reading other Q and A, it appears its either the motor pump (w10239404) or motor pump assembly (W10239405). There's about a $50 premium for the motor pump assembly, so I'm wondering how I would determine if I need the assembly or if I can get by with just replacing the motor. Any help would be appreciated.
1 Answer Tim, Were it up to me, you'd remove the motor assembly from the pump housing and check or replace the impeller assembly. The only way to eliminate the noise would be to install the circulation motor WPW10757217, and save a little $$$. Thanks and Good Luck Read More...
1 Answer Hello Sam. We will need your model number to help you with this. Thanks. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Robert July 01, 2011 for Model Number whirlpool gu1200xtlq3 How can I remove blockage from the chipper blade? I can see the screen, but dont know how to get to it. There is no water pressure coming from the pump. Can the blockage be removed from within the inside of the dishwasher, if so how?
1 Answer Hi Robert. You might be able to "loosen " the pump slightly enough to lift the chopper/ screen assembly out of the sump and flush out with sink water. The screen/ chopper part # is W10083957V. Hope this helps. Thank -you. Read More...
Mary June 17, 2011 for Model Number 665.15914001 How do I remove the old part and install this new part if I buy it from you?
1 Answer Hello Mary, This answer was located on our Repair Forum, this is a free service in which technicians will assist with answering repair questions for our customers. Please use this link to assist in your repair: http://forum.appliancepartspros.com/dishwasher-repair/204049-noisy-dishwasher-wash-drain-motors.html . Hope this helps! Read More...