Guest March 10, 2011 The ice maker has a slow leak coming in the mounted side and soon forms ice flowing down to the cube tray.
1 Answer Hello. It sounds like you have a bad water valve. Here is the part number for you. 61005626 Hope this helps. Read More...
Ron March 07, 2011 The above items says No longer includes bail arms. Does that mean the unit does not need a bail arm. If it does require one what is the part number?
1 Answer Ron, ice maker 4317943 no longer includes the bail arms, but they are needed. You can use WP627792 if you have a top and bottom mount refrigerator and W11807379 if you have a side by side refrigerator. Hope this helps! Read More...
1 Answer Hello Lloyd. You will need to test and see if you are getting power to the auger motor. You will test this when the dispenser is pressed calling for ice and the door switch is closed. If you have power, you will need to replace the motor. Hope this helps. Read More...
1 Answer Hi, unfortunately the shutoff arm cannot be adjusted to a certain level. You might have to replace the complete icemaker to correct this issue. Thanks! Read More...
Guest March 02, 2011 The ice maker makes a continuous clicking sound. It only stops when the freezer door is opened. Should I replace the whole unit? is that difficult to do?
1 Answer Hello, If the icemaker is making a clicking sound, then you will need to replace it D7824706Q. These are not hard to do, just a few screws and unplug the wires going to the unit. Hope this helps. Read More...
Guest March 01, 2011 The icemaker does not shutoff the water flow when refilling the tray. Water overflows and runs out the freezer door. How can I stop this. I have the icemaker shutoff.
1 Answer Remove the cover. There is a small white plastic adjustment screw on the right side of the module. Read More...
1 Answer Hi, this icemaker is just a replacement. The water valve would be included on a add on kit such as 1129316. Thanks! Read More...
1 Answer Hi, yes this a complete icemaker assembly. All you have to do to install this unit is, disconnect the old icemaker and install the new one. Thanks! Read More...