Ron December 15, 2020 for Model Number JGD3536WB01 How do you test whether a switch-spd is good using a multimeter? The problem is that the two bottom burners will keep sparking unless lit. Cannot only light one burner. If one is lit you must light others to make it quit trying to ignite.
1 Answer Ron, as the switch WPW10239017 is allowing the unit to spark, the switch would not be the issue. Constant sparking can be caused by a failed spark module WPW10475150 which would be the more likely case. It would be recommended that the burner heads are thoroughly cleaned and the base under them is cleaned as well as this will ensure the best contact to ground for the spark can occur. From there, it would be recommended that the igniters WP74009336 are inspected and cleaned at the spark tips as well. If the issue still continues, and the igniters do not have any visible failures, the spark module would be suspect. Read More...
Dwight P March 29, 2014 for Model Number Whirlpool Electric Downdraft Ceramic Glass cooktop Model GJD3044RG01 I have been having a problem with the larger dual element located on the front left of my cooktop. This element is controlled by the front left dual control knob. For a while when ever I turned on this unit it would not regulate and would just get hotter and hotter. This would happen even when I only turned the control knob to low power only (left side) settings. Now, however, the elements will not come on and I suspect that the switch on the dual control unit is faulty, What is the correct part number for the control switch located under the front left dual control knob?
Stacey June 29, 2012 for Model Number AP3865481 I have this part and am installing it but it seems to be loose. Thanks for your help.
1 Answer Hello Stacey. You will install the new switch WP4456836 the same way you removed the old one and secure it the same way as well. Read More...