Richard December 03, 2020 for Model Number mmv6165bas hi where is the primary micro switch # wp3405-001034 located? is it a door switch ? if so top middle or bottom ? thnx
1 Answer Richard, the primary micro switch would be the door switch and can be located behind the control panel and to the left. It should be the bottom switch and can be identified by each terminal having a black wire connected to it. Read More...
Richard December 03, 2020 for Model Number MMV5165BAS Hello Maytag microwave # mmv6165bas. When I open the door the turntable rotates. When the door closed it stops. Everything else operates as it should. Is it a door switch? If so which one. Thank you
1 Answer Richard, this would indicate a failure with the primary microswitch WP3405-001034 which can be identified by each terminal having a black wire attached to it. Read More...
1 Answer Art, with the microwave unplugged, the vent grille will need to be removed. This will allow access to be able to remove the user interface control panel and grant access to the microwave door switches. There are screws mounted to the front behind the door that can be removed to allow for the microswitch bracket to be removed, allowing for an easier switch change out. It is recommended to change each switch at a time while moving the wires from the original switch to the new switch before moving to another set. Read More...
Judy W July 06, 2019 for Model Number JMV8208DS00 Microwave door will not close so microwave will not operate. Clock, timer and fan work properly. Light stays on inside microwave.
1 Answer Hello Judy, you will want to check the strikers on the door to see if they are still intact. Unfortunately if they are damaged the manufacturer has discontinued the door assembly and we no longer have any left in stock. Sorry! Read More...
1 Answer Hello Jim, The top switch WP3405-001034 and the bottom switch WP3405-001034 are the same and the middle one 3405-001033 is different. Read More...
John R March 19, 2016 for Model Number AMV5206BAB Weeks ago the light inside stated to flicker. Now with the door closed the unit fan run and can't be shutoff and micro has no light and wont cook. Thanks John
1 Answer John, You will want to check the door switches on your unit. There should be continuity with the door open on the upper and lower switches and no continuity on the middle switch. With the issue that you are having then one of these door switches will be the issue but if they check ok then the issue will be a faulty control board. Read More...