Neil March 06, 2015 for Model Number 11028732700 Problem is very rapid shifting back and forth between hot and warm. (Every second). Cold setting is okay. Replaced the water inlet valve, but did not solve the problem. Could it be the temperature switch? Thanks.
1 Answer Hello Neil, You will need to replace the water temperature switch WP8577786. This is normally the part responsible for this sort of radical behavior. Read More...
Al November 21, 2014 for Model Number wtw5840swo Cold water selection is very very slow how ever the other selections work fine. What part do i need?
1 Answer Al, You probably don't need any parts. Turn off the water at the faucets, disconnect the fill hoses from the faucets and the washer fill valve. Clean the debris and sediment from the screened washers in the end of the hoses, and the screens in the inlet valve. Flush the faucets for a minute or so, then reattach the hoses and check for a proper fill. Read More...
Michele W April 28, 2014 for Model Number WTW5800SW0 Please provide detailed removal and installation information for this part.
1 Answer Hello Michele. Disconnect the power. Then remove the knob by pulling it off the switch. Remove the back panel for the control section. Now. lift upward on the locking tab for the switch. Twist the switch and remove it from the unit. Unplug the wires going to the switch. Install new switch in reverse order. Read More...
Chris M April 27, 2014 for Model Number SWS5800SWO Recently purchased part # 8577786. No access to panel behind panel, the clips 35, # 11 fastener both sides were removed , but no idea how to raise, slide, etc the front cover? Diagram part # 38 on the diagram.
1 Answer Chris, Unfortunately we are not showing any type of information for the model number listed. Please recheck the model to make sure that it is accurate. Please post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...