Steve August 26, 2016 for Model Number Crosley Heavy Duty Dryer Switch receive but will not turn on, worked last night but will not turn on today.
1 Answer Hello Steve. You need to check the thermal sure and the door switch. Also, check all the wiring on the unit. Read More...
Roger S March 11, 2016 for Model Number SDE515DAYW Dryer heat is very hot only. I suspect that the heat select switch is bad. No low or medium heat.
1 Answer Roger, You will want to test the temp control switch on the unit. You can do a continuity test and check for air fluff from red to any of the other terminals and there should be no continuity. If there is then the issue will be the temp sensor. The other settings to check is on Delicate, from blue to red and purple to white and there should be continuity. The same test for delicate will be used on medium with the exception you will go to the white with resistor. For regular then blue to Red. If these check ok then the issue would likely be the cycling thermostat. Read More...
Jon Bergen December 26, 2014 for Model Number lg84009w2 heat selector switch frozen and or melted in switch ..parts search turned up discontinued... would part ap4042475 whirlpool work?
1 Answer Jon, Unfortunately the heat selector switch for your unit has been discontinued which means that there is not a suitable replacement for the part. This means that the 33001640 will not work for the unit. Read More...
Abdul July 29, 2014 for Model Number Maytag Dryer Model SDG515DAWW I replaced timer, still it is not turning. Moisture sensor is Solid not blinking. The Heat inside seems to be low even though it is selected on Regular (Highest heat). Got the schematic but don't know what to look for. Any help, will appreciate.
1 Answer Abdul, You will want to remove the sensor and test across the terminals. If there is any indication other than 0 ohms then the sensor is bad and would need to be replaced. Also test the cycling thermostat to make sure that it is testing good. Read More...