Steph January 28, 2020 for Model Number WFW9351YW00 I have a Duet Whirlpool washer. The washer can successfully handle a cold wash but throws an LF code when I run a hot or warm wash. I checked the inlet valve filter screens and removed the sediment. I also checked the hot water hose for any obstructions (by just running tap water through it into my tub) and as far as I can tell its clear, but the machine still won't do a warm or hot water run. Based on this, do you think there's something wrong with the hot water inlet valve and should I replace it? Or is something else? Thanks!
1 Answer Steph, Yes, Replace the hot water fill valve WPW10212598 / WPW10212598 Valve. Based on your description, "flush" the hot water faucet and water supply (attach the hose to the faucet place the end of the hose into the drain standpipe and open the faucet for a minute or so), Install the hose and washers to the fill valve and check the washer for operation. Read More...
Eldrick June 14, 2014 for Model Number wfw9151yw00 The hot water connection is crossed threaded on the back of my washer. I need the part number so I can replace it, or do I have to purchase both hot & cold valves?
1 Answer Hello Eldrick, You will only need to replace the hot water inlet valve WPW10212598. Read More...
Mike March 24, 2014 for Model Number wfw9150ww00 I have an error code is coming on when it starts the wash cycle. After it fills I get error E8F1. I checked all inlets and they are clean. What can it be?
1 Answer Hello Mike, If water pressure is sufficient, the water inlet valve, WPW10212596 cold or WPW10212598 hot, is failing. Read More...
Gus April 16, 2013 for Model Number WFW9150WW00 How do I acees bleach valve or test this part? Bleach tray is no emptying. Where would I look for a clog? Model WFW9150WW00
1 Answer Hello Gus. Remove the top panel and then access the valve. Test for power to the valve during the bleach add cycle. If there is power there, and no water, you will replace the water valve. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Danny June 29, 2012 for Model Number wfw9250ww00 Lf Error Code Pops Up After Unit Have Started Wash,Do Not Come On Everytime. Checked Hoses, Water Pressure, Debris In Water Valve, And Made Sure Drain Hose Wasnt Siphoning.
1 Answer Hello Danny. Based on the information you provided, if it is taking the unit a long time to fill, replace the valve WPW10212598 on the unit. If there is no fill issue, you may have a pressure switch issue. Read More...