Mike November 07, 2021 I'm not sure where the black wire is to connected for my defrost timer On my refrigerator, model number is a Whirlpool ET4WVLXVQ00. I did not get any wiring instructions with my part
Levi October 31, 2021 for Model Number Whirlpool ET20DK There weren’t any instructions included with my replacement defrost timer and after watching the video I’m not sure which place to put the black wire. Model is Whirlpool ET20DK. There’s also a green grounding wire on the original timer, what do I do with that?
1 Answer Levi, unfortunately, the model number provided appears to be a partial model. However, if the wires going to the defrost timer include a white wire, the timer black wire will go to terminal 1. If there is not a white wire, it will go to terminal 2. The green ground wire can be taped off as it is not needed with this timer. Read More...
Dan October 17, 2021 for Model Number Model # ED25DWXTN01. Which terminal do s the black wire go to on the defrost timer. Thanks What terminal does the black wire go on the defrost timer
Brian October 10, 2021 for Model Number ED25TQXEN00 Replacing the defrost timer on my Whirlpool. What pin does the black wire go on? I didn't get any instructions. Thanks, Brian
Patrick October 06, 2021 for Model Number mod# 1069550750 Can the defrost timer get stuck in defrost mode, and then move to start the refrigeration cycle again? That is what seems to be happening. The food thaws and water is on the floor, Coil is not frozen, and after removing the food and placing a bowl of water in the freezer and checking a couple hours later the water is frozen
1 Answer Patrick, Thanks for the question!!! Yes, it is possible the gears of the timer have an issue and prolongs a cycle. There could also be an issue with the sealed system or the compressor. Read More...
Joseph September 28, 2021 for Model Number ED5CHQXKQ02 Where does the black wire go on the defrost timer for model # ED5CHQXKQ02? I've read the questions but haven't seen my model number being asked.. Thank you so much.
1 Answer Joseph,Based on the wiring diagram of your model the black wire should go on terminal number one. Read More...
Bill September 11, 2021 for Model Number 106-8648580, Kenmore I received a defrost timer AP5985208, but it did not come with instructions. What terminal is the black wire to be connected to?
Jack September 03, 2021 for Model Number IKT162300 With timer defrost W10822278, witch terminal does the black wire should be hooked on?
1 Answer Hello Jack, The black jumper lead should be connected to terminal number "1" for a defrost cycle every 8 hours. Read More...
Richard September 02, 2021 for Model Number ET20DKXSN00 My new defrost timer did not come with instructions. Can you tell me based on Model # ET20DKXSN00 what terminal to connect the black wire to? Thanks!
Kevin September 02, 2021 for Model Number W6TXNWFWT03 replacing defroster timer. What terminal does black wire need to be installed on?