Eric K June 03, 2016 for Model Number ET18NKXDW01 Which terminal does the black wire attach to for defrost timer w10822278?
1 Answer Hello Andres. You will need to install the black wire onto terminal number 2 of the defrost timer. Read More...
Matthew May 10, 2016 for Model Number TBF16D I have a TBF-16D and it has a: orange, black, grey and blue cords to attach to the defrost timer. Since this does not match up with the instructions that I was sent I would like to know what number matches which color. Is it that the wiring has been wrong in the first place? Or how do I determine what lead corresponds to which terminal?
1 Answer Hello Matthew. You will need to check and get your full model number. The number you provided is not showing a wiring diagram for us to help you repair the unit. Read More...
Gene May 01, 2016 for Model Number ER2CHMXPL00 Whirlpool Does the black wire on the defrost timer belong on terminal 1 or 2.
1 Answer Gene, For your unit you will push the black wire on the timer down on terminal labeled number 1. Read More...
Larry April 16, 2016 for Model Number ED25PQXDW03 My timer defrost has black wire, which terminal does it attach to?
1 Answer Larry, The black lead on the defrost timer W10822278 will go on the terminal labeled number 2 on the timer for your unit. Read More...
Carlos D. April 02, 2016 for Model Number 10650522100 Does this model uses a continuous run timer or a compressor run timer? I installed the timer with the loose lead on lead 2, but the timer seems to be stuck on the same place. But if I manually set it to defrost it runs the the defrost cycle for about 20 minutes and then goes into the cold cycle. I replaced the timer, and the bi-metal sensor, and I can see the defroster getting red-hot during the defrost cycle, when I set it manually. But if I let it run, after a couple of days the evaporator gets obstructed with frost.
1 Answer Carlos you have a "Cumulative" compressor run application. The loose timer wire should be attached to terminal 1, The orange wire attached to terminal 1 on top of the black wire.The pink wire on terminal 2, the white wire attached to terminal 3 and the red wire attached to terminal 4. Read More...
Carlos D March 30, 2016 for Model Number 10650522100 Defrost Timer W10822278 where will the black wire be installed?
1 Answer Hello Carlos. You will need to install the black wire onto terminal number 2 of the timer. Read More...
Sp March 29, 2016 for Model Number ED25PEXHT01 I have a defrost timer with the black flying lead. Over which pin does the wire connect. Thanks.
1 Answer SP, For your unit the black lead will go over terminal labeled number 1 on the timer. Read More...
Darrin March 27, 2016 for Model Number ET8GHMXLQ03 Which terminal on the defrost timer does the black wire go?
1 Answer Hello Darrin, You will need to connect the black lead to the number "1" terminal. This will provide voltage to the timer motor for proper advancing/defrosting results. Read More...
Ken March 25, 2016 for Model Number Kenmore 106.57262792 Kenmore 106.57262792 and lost the schematic. Replacing the defrost timer with part 482493 (old one was 2176648). Can you tell me which post gets the black wire on this model?