Doug December 28, 2015 for Model Number W4TXNWFWQ03 My fridge stopped running while away this weekend, I had a hunch to advance the defrost timer and the fridge kicked on and has been running since(few hours). Would you think it was a defrost timer issue or a defrost thermostat issue?
1 Answer Hello Doug. Based on the information you provided, the defrost timer is bad and will need to be replaced. Read More...
Brian Y. December 19, 2015 for Model Number Inglis JT74191 Defrost timer starting to make a noise during defrost cycle. Current part# 20143568 I find can be replaced by your 482493. Current connection is plug 3(R), 4(OR), 1 (BK) and 2(PK). Current timer also has separate black lead that runs into box beside timer. Is it as simple as plugging plug in as is and running black lead on 482493 to same location as current black lead? I ask because instructions talking about hooking black lead to either plug pin 1 or 2.
1 Answer Hello Brian, You should connect the black lead to the terminal labeled on the defrost timer as terminal number One, (1). Read More...
David December 16, 2015 for Model Number W6TXNWFWQ01 Which terminal do I attach the black motor wire to?
Aaron December 04, 2015 for Model Number whirlpool GD22DK Not sure if my fridge is continuous or cumulative so looking for help with which lead to attach to.
1 Answer Aaron, For your unit you will need to put the black lead wire on the terminal number 1 on the timer. Read More...
Tim November 17, 2015 for Model Number Ed27pqxfn02 On changing a defrost timer #10822278, what terminal does the black wire hook to?
1 Answer Hello Tim, The loose jumper lead on the defrost timer assembly W10822278 connects to terminal number 1 as marked on the defrost timer housing. Read More...
Lori November 17, 2015 for Model Number 10659502993 I have a Kenmore Coldspot model#10659502993. Where do I connect the loose black wire, my original didn't have a wire attached & was a 10 hr. timer, this replacement says 8 hrs. Trying to replace myself.
Masahiko F November 14, 2015 for Model Number m4txnwfywoo Where should I connect the black wire to which terminal? Thanks
1 Answer Masahiko, The black lead will go to the terminal labeled number 2 on the timer for your model. Read More...
Masahiko F. November 13, 2015 for Model Number M4TXNWFYW00 Part AP5985208. Where does the black lead go?
1 Answer Hello Masahiko, Connect the loose wire to terminal #1 as labeled on the defrost timer housing. Read More...
Daniel November 13, 2015 for Model Number ED25PQXDW01 Where does the loose black wire suppose to go (1 or 2 ) for my whirlpool refrigerator def-timer (482493)? Thanks
1 Answer Daniel, The loose black timer wire will attach to terminal no. 2 ( with the pink wire) on the new defrost timer. Read More...