Jack November 02, 2015 for Model Number TCX22PABWW Where do I connect the black lead on my universal defrost timer on My GE Profile bottom freezer? Thanks
1 Answer Hello Jack, If the model number is actually TCX22PACBWW, you will need to connect the black lead to terminal number 1 as labeled on the timer. Read More...
Jim October 27, 2015 for Model Number ET20NKXDW10 Where does the loose black wire suppose to go (1 or 2 ) for my whirlpool refrigerator def-timer (482493)? Thanks
John October 20, 2015 for Model Number ET1PHKXPT00 I just received my defrost timer part AP5985208 from you today. Not sure which terminal gets the black wire for my refrigerator model ET1PHKXPT00. The existing original defrost timer part number is 2188376. Need help.
1 Answer John, The black wire on the timer will go to the terminal listed as number 1 on the timer for your model refrigerator. Read More...
Dan October 07, 2015 Have a whirlpool refrig. Model # EDT192NKWR0. Am installing a # 482493 Defrost Timer. Typical question--Which contact does the black wire go to?? Frig. is old & schematic is long gone. Thanks for your help. --Dan
Emet October 04, 2015 for Model Number 106.9532820 Which terminal should I place the jumper on for Kenmore 106.9532820?
1 Answer Hello Emet. You need to place the black wire onto terminal number 2 of the timer. Read More...
Joseph K September 20, 2015 for Model Number W4TXNWFWQ03 I replaced the Defrost Timer #2188371, what terminal does the black wire connect to , terminal 2 ?
Tammy September 16, 2015 for Model Number ET1CHMXKT03 Whirlpool refrigerator defrost timer came with a black wire. I do not have the wiring diagram. Which terminal do I attach it to?
1 Answer Hello Tammy. You will need to attach the wire to terminal number 2 of the defrost timer. Thanks. Read More...
Thomas September 08, 2015 Have a side by side refrigerator and the refrigerator gets warm. Take back panel off of freezer and froze up. I use hair dryer to defrost it and works for 4 or 5 weeks. What is wrong with it.
1 Answer Thomas, You have a defrost issue going on with the unit. You will want to remove the rear wall in the freezer and do a continuity test of the defrost thermostat and defrost heater. If one of the 2 parts has no continuity then replaced the part. If both check ok then the issue will be a faulty defrost timer. Read More...
1 Answer Hello Pedro, You should connect the jumper lead to the number one terminal for a continuous run configuration. Read More...
Tsylor September 03, 2015 for Model Number FRT045GB Trying to replace a DBYC903BL timer with a whirlpool 482493 and need to know wire placement?? Is it a version 1 or 2 ?
1 Answer Hello Tsylor. Sorry, you can not use this timer in place of DBYC903BL. It looks like you will need part number 5304470332. Just match up the wire colors with the timer. Read More...