Darrell May 19, 2020 for Model Number CAM2742TQ2 I have a model CAM2742TQ2 that does not spin on final spin, just continuously drains while the final spin light is on. Spins on rinse cycle but not final spin so it's nothing mechanical. Lid switch works fine. I replaced the control board, didn't fix it. Is this a timer issue?
1 Answer Hello Darrell,yes this is a timer issue the replacement timer is part WPW10112081. Read More...
Joe A December 02, 2014 for Model Number CAM2742TQ0 Machine washes but when it lights up for spin cycle nothing happens.
1 Answer Hello Joe. Yu need to check and see if the lid switch WP8054980 is bad and will need to be replaced on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Jason June 19, 2014 for Model Number cam2742TQ0 Washer won't start unless I open the top lid of the box and push the lever that gets pushed when you put coins in. Will not start on its own when you put coins in. Would this be a timer issue? I believe that lever comes off the timer. Thanks
1 Answer Hello Jason, This sounds like a timer WPW10112081 issue. The timer will take care of this if the coin chute W11244229 is operating properly. Read More...
Rich November 04, 2013 for Model Number cam2742tq2 Customer says that the washer does not fill with enough water on the rinse cycle only. Wash cycle is OK even with cold water only. Rinse cycle is cold water only. Washer only fills about half way on rinse cycle. Any ideas? Thanks
1 Answer Hello Rich. This is the way these machines are designed and there is nothing you can do to correct the issue. The dual pressure switch models are designed for a half fill on rinse. Read More...