Kevin June 29, 2011 for Model Number atw4475vqo The admiral washer model atw4475vqo will not fill, wash or rinse on any cold or cool water setting. It will fill briefly with hot water only on any cold, cool, or warm setting and then immediately halt. I have changed the water inlet valve and temperature switch. My question concerns my next step. A wiring check appeared okay. Do I change the timer next or try another approach? Thanks.
1 Answer Hello Kevin. Based on the information you provided, and the wiring diagram, it sounds like the timer WPW10199989 is bad and will need to be replaced. Hope this helps. Read More...
Kevin June 27, 2011 for Model Number atw4475vqo I have already replaced the water inlet valve and temp control switch on this model. I was told to check the wiring before replacing the timer. Does the good wiring check mean that replacing the timer is a definite next step? Thank you.
Kevin June 24, 2011 for Model Number atw4475vqo I have checked the brown and yellow/red wires connecting the timer to the temp control switch. Both wires indicate less than 1 ohm of resistance. Have I checked the wires correctly? What does it mean for my repair problem?
1 Answer Kevin, What is the issue, with the washer ? Your wires are checking out fine, so at this point, the wires are not the problem. Thanks. Read More...