John April 19, 2013 Replacing Part Number: 3952379c, but the molex connector is bad too, the connectors are all toasted. i'm savy with molex pins but i'm not sure how to buy just the connector. thoughts?
1 Answer John, Without the model number we would not be able to tell you if you can get just the molex connector. In most cases though you will have to get the wiring harness to replace the molex connector. Please post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Johnnyrotten January 27, 2013 for Model Number 110-98752794 How do I get the timer knob off to replace the timer?
1 Answer Hello johnnyrotten. With the timer knob pressed in, you will pull on the clip on the back of the timer with needle nose pliers and then pull the knob off the front of the timer as you pull the clip on the back. Read More...
Johnny R January 25, 2013 for Model Number 11098752794 How do I get the knob off the timer to put new timer in?
1 Answer Hello Johnny, Once you have the timer exposed, on the back of the timer, in the center there is a shaft. Pull the shaft out and the timer knob will come off. Read More...
Rodney M August 13, 2012 for Model Number 110.88752794 This is an over and under washer dryer. I'm not sure how to get the knob off the timer. Do I drop the diagonal panel above the washer and reach up in back to hold a clip of some sort and then pull knob off? Not sure what to do. Some how to site showed using needle nose pliers to pull out clip on a regular washer with flip up top panel but the dryer on top model isn't two screws and flip up the top console. Thanks
1 Answer Hello Rodney. Yes, you remove the knob the same way, but on this model, you remove the access panel screws and remove the panel. then remove all the screws securing the control panel to the cabinet and remove the control panel. Then you can remove the knob from the timer. Make sure the power is disconnected before doing this repair. Read More...
Ht March 26, 2012 Hello, I ordered this part and it came with a Whirlpool part number of 3952379C. The one in my washing machine is a 3952379A. Are these parts interchangeable? Does the "A" and "C" make a difference? Thanks.
1 Answer Hello HT! The part number is 3952379, our part number WP3952379. The A and C at the end of the part number does not make a difference. This shoudl work on your product if ordered per part number of the original timer or per the model number of your appliance. Thanks! Read More...