1 Answer Hello Russ. Turn off power. If it is the timer, these are not hard to replace at all. Remove the knob center and the clip to remove the knob. Access the back of the timer and remove the wires from the timer. Remove screws and remove timer from the unit. Install new timer in reverse order. Read More...
Bobo June 11, 2015 for Model Number Lat 2500 aae Machine does nothing think it's timer. How difficult is it to replace?
1 Answer Hello Bobo. Turn off power. If it is the timer, these are not hard to replace at all. Remove the knob center and the clip to remove the knob. Access the back of the timer and remove the wires from the timer. Remove screws and remove timer from the unit. Install new timer in reverse order. Read More...
Kevin Z December 20, 2014 for Model Number maytag lat2500aae The washing machine does not do anything, There is power to the timer. Is the timer bad?
1 Answer Kevin, If the unit is not filling then you will want to check to make sure that there is power going to the water valve. If there is power to the water valve then check to make sure that the water is turned on and check to make sure that the water valve screens are not clogged. Read More...
Jake November 30, 2013 for Model Number Maytag lat2600aae The washer works great till it gets to the spin cycle. It starts spinning and never stops. Do I need a timer?
1 Answer Jake, Yes this issue does sound like it would be caused by a faulty timer. The contacts sticking on spin cycle, timer part number WP22003363 Read More...
Louise September 16, 2012 for Model Number LAT 9206AAE my top loading Maytag washer cycles seem not to be working correctly. Sometimes after it fills it won't agitate, sometimes it won't spin. At first, the machine was hesitating between cycles now it either hesitates for minutes at a time or doesn't work at all. Any help
1 Answer Hello Louise. Check and make sure the lid switch is good on the unit. If so, you may have an issue with the contacts in the timer WP22003363 being bad and will need to replace the timer. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
1 Answer Hello Les. Based on the information you provided, it sounds like the timer WP22003363 is bad and will need to be replaced on the unit. Read More...
Michaelo May 11, 2012 for Model Number Maytag Performa LAT2500AAE As a follow-up to my previous question. Both the regular and the Wrinkle Free cycle stops after the tub has filled for the rinse. Then the machine stops. On the Delicate Cycle the machine goes through the complete cycle ?? Timer BAD?
1 Answer Hi Michael. Yes from what you have described, the timer is in need of replacment part # WP22003363. Thank You. Read More...
Michael O. May 11, 2012 for Model Number Maytag Performa LAT2500AAE Machine will not spin in regular or wrinkle free fabrics cycle. Will spin in delicate cycle if I turn the select knob to the spin setting. Machine does spin after wash cycle and fills for rinse cycle. After the rinse cycle nothing ?
1 Answer Hi Michael. This does sound like the timer is needed. Part # WP22003363. Thank You. Read More...
John C. May 09, 2012 for Model Number LAT2500AAE My wife sets the machine to wash 18 min It continues to run past 18 minuets and she has to move the dial to advance it. What do you think is wrong?
1 Answer Hello John. Test and see if there is power coming to the timer motor. If so, and the timer does not advance, you will need to replace the timer WP22003363 in the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...