Jack November 09, 2016 for Model Number WFW9450WR00 The inner tub opening varies in diameter from about 15 1/2 inches to a little over 16 inches. The rear of the inner tub appears to have what look like dents around the outer edge. The machine is making a loud banging noise a times, not always, when on spin cycle. Some of the banging seems to be coming from the rear of the tub when you stand behind it while it is operating in spin mode. The inner tub appears to be making contact with the outer tub at the front by the door. Is this an inner tub issue or an outer tub issue? What parts would you recommend be replaced?
1 Answer Jack, Based on the issue it sounds like this would be caused by a faulty spider on the unit which would need to have the inner tub replaced on the unit. Read More...
Robert March 25, 2016 for Model Number WFW9200SQA12 280238 and 280232 parts are both tub-outer and both test compatatable with my model what is the differance?
Paul January 31, 2016 for Model Number WFW9200SQA10 The washer shakes a lot. I am going to replace the outer tub assembly part #280232. Should I also replace the front tub assembly? It seems to have some wear between the drum and the front tub.
1 Answer Paul, It would be recommended to replace the front tub if the inner tub has been rubbing against it. Also check the inner tub spider on the back of it for being broken. This may be the cause for the shaking around. Read More...
Rick December 11, 2015 for Model Number 110.47751800 I have a kenmore elite quiet pak 9 front load washer and I have determined that the bearing on the wash tub is bad, I am considering replacing just the bearings and seal. What I need to know is if I buy this outer tub does it come with the bearings and seal? Thank you. Rick
1 Answer Rick, Yes, if you purchase the rear outer tub of the unit it will have the bearings and seals included with it. Read More...
Jody C. November 19, 2014 for Model Number GHW9400PL1 Can I use the basket off of Whirlpool Duet model # WFS9200SQA10 for my Whirlpool Duet model # GHW9400PL1? Also would need to replace the front outer drum.
1 Answer Hello Jody! No, we can not recommend the two drums to be interchangeable as both models use different parts. For model GHW9400PL1 use basket part number WPW10269756 and outer tub part number W10772618. Found model WFW9200SQA10 (not WFS9200SQA10), use basket part number WPW10040480 and outer tub part number 280232. Thanks. Read More...
Jamie M October 07, 2012 for Model Number wfw9200sqa12 The bearing has gone out on my washer. Which parts and how hard is it to repair? I have moderate skills.
1 Answer Hello Jamie. You will need to order the outer tub assembly 280232. On a scale of 1-5, this repair would be a 5 for hard. You will have to disassemble the whole machine in order to replace the outer tub. This is a 4 to 6 hour job for some people. Read More...