Parts for Ge CSB48WSKCSS: Quick Chill Parts

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Damper Assembly is an OEM component specifically designed for GE refrigerators. This assembly is located within the fresh food compartment and functions to control airflow and temperature regulation. 

The damper works with the evaporator fan to carefully moderate circulating air, preventing cold spots and optimizing equal cooling. Consistent temperatures extend the shelf life of perishable goods. 

Causes of a faulty damper assembly can include failure of the plastic gears or axle that coordinate its movements over time. Improper air circulation disrupts the refrigerator's performance.

Symptoms include: 

• Formation of frost or ice buildup in problem areas  
• Inconsistent shelf temperatures from top to bottom
• Foods spoiling more quickly 

This replacement assembly from GE restores dependable temperature control. Upgrade today for continued fresh food preservation abilities matching OEM standards. It is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This vegetable crisper wire frame supports and secures the refrigerator crisper/produce drawer for organized storage and proper airflow. It replaces a bent, broken, or missing wire frame to restore drawer stability and alignment. What it does:

• Holds the crisper/produce drawer in place so it slides correctly and stays level
• Provides structural support to prevent drawers from tilting or falling
• Helps maintain proper airflow around produce by keeping the drawer aligned
• Addresses symptoms like a wobbly, misaligned, or unsupported crisper drawer

• Disconnect power to the appliance or unplug the refrigerator before working on internal parts
• Remove the crisper drawer and any shelf/retainer blocking access before swapping the frame
• Reinstall carefully, ensuring the frame seats in its mounting points; check drawer travel and alignment after installation
• If fasteners or clips are corroded or damaged, replace them with OEM replacements for secure fitment

This Cover QC is a replacement control cover that protects the appliance's control board and wiring from dirt and accidental contact, restoring a clean, safe control area. It helps keep electronics shielded and maintain panel integrity. What it does:

• Protects the control board and wiring from dust, spills, and physical contact
• Restores a secure enclosure for the appliance's control components
• Helps prevent intermittent faults caused by debris or accidental contact
• Fits where the original control cover was installed to maintain proper housing alignment

• One control cover

• Disconnect power to the appliance before beginning any work
• Access the control housing using the manufacturer's recommended procedure
• Handle the cover and nearby wiring carefully to avoid damaging connectors
• If screws or clips are damaged or missing, replace them with OEM-specified fasteners

This thaw heater is the evaporator defrost heating element that melts frost during the refrigerator's defrost cycle. Replacing a failed heater helps restore normal defrosting and reduce frost buildup that can restrict cooling. What it does:

• Heats the evaporator coil during the defrost cycle to melt accumulated ice
• Prevents excessive frost buildup that can block airflow and reduce cooling efficiency
• Common symptoms of a failing heater: heavy frost or ice on the evaporator/back wall, reduced cooling, or long compressor run times
• Works as part of the appliance's defrost system alongside the defrost thermostat and control

• Disconnect power to the appliance before starting any repair
• Access typically requires removing interior panels and the evaporator cover; handle the evaporator and wiring carefully
• Inspect associated defrost components (thermostat, timer/control) if problems persist; replace only parts confirmed faulty

The Defrost Thermostat is an OEM part for GE refrigerators. This part monitors the temperature of the evaporator coil to ensure it remains within optimal operating limits. When the temperature gets too high, the defrost thermostat signals the defrost heater to activate, preventing ice buildup on the coils.

Common causes of failure include electrical malfunctions, wear and tear over time, or physical damage to the thermostat or its wiring.

Symptoms of a bad defrost thermostat include:

• Excessive frost buildup in the freezer
• The refrigerator running constantly or not maintaining the correct temperature
• Water leaks inside the refrigerator due to ice melting and refreezing

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.