Parts for Mastercut 11A-B24A059 / 2012: .Quick Reference 11A-B2x Parts

A fuel filter is designed to ensure that the fuel flowing into an engine is as clean as possible. When combined with an effective air filter, this dramatically improves engine durability. In general, a fuel filter should be replaced during a small engine’s annual maintenance cycle. This is true whether the filter is inside a lawnmower, snowblower, or another small engine. Symptoms of a failed fuel filter include stalling, particularly when the throttle is fully open. A clogged fuel filter can also be checked visually. If it’s cloudy or there are particles are inside, it needs to be replaced. If there is visible rust during this process, check the fuel can and gas tank for any rust on the inside. Discard any bad gas and replace it with fresh gasoline. Initially, this fuel filter was used for MTD snowblowers. Since then, it’s been used by several other manufacturers, including Briggs & Stratton, Cub Cadet, Yard Machines, and Honda. This is an OEM filter sourced directly from MTD, and it is sold individually.

Pre-cleaner filter wraps around your engine's air filter to trap large debris before it reaches the main filter. Replace when torn or clogged to maintain airflow and engine protection. Verify fit by model number.

Fuel filters are created to strain out gas before it reaches the carburetor in lawnmowers and other gardening tools. Located in the fuel line or the fuel tank, it prevents unwanted debris from reaching the carburetor, which can cause engine damage. If the

Graphite coating lubricant for lawn mowers and garden tractors. Reduces friction on moving parts. Replace when lubrication diminishes. Confirm fit.

Replaces a cracked, missing, or worn fuel cap on lawn mowers and outdoor power equipment. Ensures a secure seal to prevent fuel evaporation and leaks.

This control cable is a mower part that works with the control handle or lever bar that engages the wheels. It is also known as choke cable, brake cable, choke control, and control assembly cable. The inner wire total length is 53 inches, and the cable ca

A fuel tank cap assembly prevents contaminants and particles from entering the gas tank and causing problems with the carburetor or engine. The cord between the insert and the fuel cap is meant to prevent the loss of the fuel cap. However, over time the c

This cover is a genuine MTD part, sold individually. This cover can be used as a replacement part in a lawn mower. This cover helps to protect the mower from exposure to dust and the elements.If the cover is punctured, ripped, torn, or otherwise leaves th

A fuel cap assembly is a component often seen on lawnmowers and other lawn and garden equipment. It is made of durable black plastic and is used to ensure that fuel doesn’t spill out of the fuel tank. Over time, fuel cap assemblies can begin to wear out a

Air filter element for walk-behind mowers and outdoor equipment. Replace when clogged or damaged to maintain engine performance. Confirm fit with model.

This replacement part is a hand-held oil pump, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This oil pump is small and portable and is able to assist the user during oil changes in their

This is a small engine spark plug positioned in the engine cylinder head. It supplies the spark that will ignite the air-fuel mixture to enable an engine to produce power. This particular spark plug is designed with superior corrosion resistance and depen

Air cleaner filter prevents dirt and debris from damaging your mower engine. Replace when thin, damaged, or dirty to maintain performance. Verify fit.

Blade removal tool for lawn mowers and garden tractors. Safely holds the blade in place during removal or installation. Replace if damaged or missing.

This wheel assembly is created for a variety of lawnmowers and attaches to the front of the machine. The wheel is made from a durable plastic material and connects to the front axle assembly. It is a required part for moving the lawnmower around the yard.

Metal blade support spacer that mounts between the mower blade and bolt. Secures the blade to the deck base. Replace if worn, damaged, or missing.

Mower vibrating excessively or blade loosening? This blade adapter connects the motor shaft to the mower blade. Simple DIY repair, typically 15 minutes.

Connects the cutting blade to the drive shaft on push mowers. Replace if adapter is chipped, cracked, worn, or loosened to restore secure blade mounting.

Installing a brand-new air filter keeps the engine in top running condition. When the machine is in operation, the vacuumed air goes through the air filter. Any dirt or dust is left in the filter media. Over time, the filter will become dirty and can no l

Attaches to the back of your walk-behind mower deck to prevent grass and debris from reaching the operator. Replace if cracked, broken, or missing.

Hex bolt secures blade adapter and other components on lawn mowers. Replace if bolt is stripped, damaged, or missing to properly fasten parts.

Side discharge chute for walk-behind mowers. Directs grass clippings away from mower deck. Replace if cracked, broken, or missing to prevent clogging.

Replaces worn, dull, or damaged 21-inch mulching blades on walk-behind mowers. Features curved design for effective mulching. Upgrade your rusty blade.