Need Help?
Call or text
Show parts
A fuel filter is designed to ensure that the fuel flowing into an engine is as clean as possible. When combined with an effective air filter, this dramatically improves engine durability. In general, a fuel filter should be replaced during a small engine’s annual maintenance cycle. This is true whether the filter is inside a lawnmower, snowblower, or another small engine. Symptoms of a failed fuel filter include stalling, particularly when the throttle is fully open. A clogged fuel filter can also be checked visually. If it’s cloudy or there are particles are inside, it needs to be replaced. If there is visible rust during this process, check the fuel can and gas tank for any rust on the inside. Discard any bad gas and replace it with fresh gasoline. Initially, this fuel filter was used for MTD snowblowers. Since then, it’s been used by several other manufacturers, including Briggs & Stratton, Cub Cadet, Yard Machines, and Honda. This is an OEM filter sourced directly from MTD, and it is sold individually.
Usually ships within 4 - 14 days
Replacement speed control cable for self-propelled walk-behind mowers. Installs from handle to transmission. Replace if frayed, broken, or stretched.
A fuel tank cap assembly prevents contaminants and particles from entering the gas tank and causing problems with the carburetor or engine. The cord between the insert and the fuel cap is meant to prevent the loss of the fuel cap. However, over time the cord can wear out and break. The threads on the cap can also become worn down or swell from heat. When this occurs, consider replacing the fuel tank cap assembly. The replacement job is easy and should not need any tools, except maybe some vice grips to remove the old fuel tank cap assembly. This fuel tank cap assembly will work in conjunction with many different types of lawn and garden maintenance equipment. Most have a small engine, like lawnmowers, tillers, and log splitters. Some of this equipment is produced by the brands Craftsman, Cub Cadet, Honda, Huskee, Lawn-Boy, Mastercut, MTD, Murray, Troy-Bilt, and Yard Machines. It is a genuine OEM part.
Blade adapter assembly for walk-behind mowers. Connects the cutting blade to the engine crankshaft. Replace if cracked, stripped, or worn for secure blade mounting.
Replacement grass bag that attaches to the rear of your walk-behind mower to collect clippings and debris. Needed when original is torn, cracked, or missing.
Air cleaner filter prevents dirt and debris from damaging your mower engine. Replace when thin, damaged, or dirty to maintain performance. Verify fit.
Metal blade support spacer that mounts between the mower blade and bolt. Secures the blade to the deck base. Replace if worn, damaged, or missing.
Attaches to the back of your walk-behind mower deck to prevent grass and debris from reaching the operator. Replace if cracked, broken, or missing.
Hex bolt secures blade adapter and other components on lawn mowers. Replace if bolt is stripped, damaged, or missing to properly fasten parts.
Side discharge chute for walk-behind mowers. Directs grass clippings away from mower deck. Replace if cracked, broken, or missing to prevent clogging.
Replaces worn, dull, or damaged 21-inch mulching blades on walk-behind mowers. Features curved design for effective mulching. Upgrade your rusty blade.