Parts for Yard Machines 24A-45M3000 / 2010: .Quick Reference 24A-45M3000 Parts

This is a chipper impeller assembly that can be used with a range of chippers and chipper-shredders. The impeller is the part of the chipper that rotates, and it is what allows for the chipping or shredding to take place. It will shred leaves, yard waste, and tree limbs. If there is an issue with the chipper impeller, it will reduce the efficiency of the machine. In some cases, it might not work at all. One of the signs that the impeller has problems is that it is turning slowly. It might also make a lot of noise.The impeller is a durable piece, but it does a lot of work. This means it is subject to wear and tear. Over time, it might become worn out or damaged, which will require a replacement. This replacement could be done by the owner. However, they need to remove the spark plug wire first and wear gloves to keep their hands safe.The chipper impeller assembly works for select machines from MTD, Troy-Bilt, Husky, and Yard Machines. This is a genuine OEM replacement part sourced from the manufacturer, and it is sold individually.

This is a chipper blade, which is installed on wood chippers and is used for cutting up pieces of wood into small chunks. Chipper blades need to be sharpened at least once a year or after about 25 hours of use. If the chipper blades aren't maintained, they will become dull and won't provide the required level of cutting power needed for wood chippers. If wood chips from the chipper are uneven, shredded, or rough, then sharpening or replacement may be needed. Make sure to take out the spark plug before the hopper is removed and connected to the tool. Next, remove the housing around the blades and the rotor assembly. The bolts around the blades can be taken off using an Allen wrench. Remove the blades, but be sure that work gloves are used to prevent injury. The replacement blade can be installed at this time. This is an OEM replacement chipper blade that can be used on wood chippers from Craftsman, MasterCut, Cub Cadet, Yard-Man, Yard Machines, and MTD. It's sold individually and comes directly from the manufacturer. The replacement will require an Allen wrench set, a wrench set, a socket set, and pliers.

A flail blade is a mechanism most often found in wood chippers and shredders. It is compatible with products by brands such as MTD, Troy-Bilt, Yard Machines, Cub Cadet, and Yard Man.The flail blade part is made out of what is commonly referred to as teeth or knives. The purpose of the flail blade is to serve the machine with the short pieces of metal attached to an axle that turns rapidly. A flail blade is capable of cutting grass and other plants. A flail blade can be mounted on the front, back, or side of outdoor machinery.This flail blade is made out of metal. This flail blade is an original OEM part sourced directly from the manufacturer, MTD. It is sold individually.

This is a small engine spark plug positioned in the engine cylinder head. It supplies the spark that will ignite the air-fuel mixture to enable an engine to produce power. This particular spark plug is designed with superior corrosion resistance and dependable performance. Small but mighty, this component allows for increased conductivity and heat control. If the spark plug is damaged or in poor condition, many problems may arise in equipment, including sudden stop while running, overheating, and excessive gas consumption. Replace the spark plug by disconnecting the spark plug wire first, then use a socket driver or wrench to remove the spark plug. Install the new spark plug by turning it by hand initially to avoid cross-threading. If it doesn't twist anymore, use a deep socket wrench or socket driver to tighten the plug until snug. The spark plug can also be used to tune up outdoor power equipment or improve a small engine. This part is recommended to be replaced once per season. This part works with lawn mowers, snowblowers, tillers, leaf blowers, log splitters, wood chippers, and others with small engines. It is compatible with brands such as Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and MasterCut. This is a genuine OEM part directly from the manufacturer and is sold individually.

This hopper collar is a genuine Husqvarna part, sold individually. This hopper collar can be used as a replacement part for a chipper shredder. This hopper collar affixes to the impeller housing and the hopper assembly as a protection and a cover to protect those internal components from damage.The hopper collar might have to be replaced at some point within the standard lifespan of the appliance if it suffers sufficient damage to merit a replacement. This could occur if the hopper collar is seriously punctured, torn, scratched up, or eroded from general wear and tear or as a result of a direct impact with a hard object that warps the component. If this occurs, the hopper collar should be removed and replaced by this genuine OEM replacement part. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This hopper collar is compatible with the following outdoor appliance brands: MTD, Craftsman, and Yard Machines.

This genuine MTD shredder screen determines the size of the shreds that the wood chipper will produce. A shredder screen covers any number of shapes and sizes of screens through which the wood will be chipped.A shredder screen might have to be replaced in the event that it suffers damage over time or in the case that the wood chipper encounters wood that is too hard or too brittle, which can break the shredder screen. The bars of a shredder screen can be welded back into shape by hand, but it is easier and safer to order a replacement shredder screen if it is subject to breaking, piercing, puncturing, or erosion to the metal material. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This shredder screen is compatible with the following brands: MTD, Cub Cadet, Yard Machines, Yard-Man, Craftsman, and Troy-Bilt. This part is sold individually.

A blade is the part of chippers and shredders that cuts the grass. It spins rapidly and pulls the grass up before cutting it. The grass is sucked into the deck, where the clippings continue to get chopped into smaller pieces before getting expelled. With regular use of the blade, after accidental damage, or because of the age of the machine, the blade may cease to perform adequately. Running the lawn equipment over rocks or other solid obstacles may also cause the blade to break. In any case, the blade has to be removed, and a new blade should be installed. Wear gloves for protection and handle the blade with caution. Make sure the machine is cooled entirely before beginning the repair.This blade is a genuine OEM part sourced directly from the manufacturer. It is made of durable, high-quality metal. The blade is sold as an individual unit. The replacement part is compatible with MTD, Troy-Bilt, Yard Machines, and Huskee brand lawn and garden machines, including chippers and shredders.

This replacement part air cleaner is an OEM part for use in small engines used in outdoor equipment, such as tillers and dethatchers. The air cleaner is responsible for ensuring that clean air is brought into the engine to provide optimal performance. It is a good idea to inspect the air cleaner assembly regularly to ensure that there is no damage or cracks that could allow dirt and debris to get into the engine. If there are any issues, get a replacement before operating the engine again. This will ensure that there is no additional dirt getting into the engine. The genuine OEM air cleaner is a quality item that comes from the manufacturer. It is sold individually. It can work with tillers and other machines from top brands like MTD, Craftsman, and Yard Machines.