Need Help?
Call or text
Show parts
This replacement part is a key starter. This is a genuine replacement part made by MTD. This handy part is made to assist users in starting up and turning off riding lawn mowers. This works with the key itself to allow the user to control the engine during use.A new key starter might be needed if the current one is damaged. This can be due to an isolated incident or from normal wear and tear caused over time. If the key starter is damaged, it should be replaced as soon as possible so that the machine can return to working order. Be sure to refer to the proper user manual before attempting to replace this part. This part is also a genuine OEM replacement part to ensure proper fit. This part is sold individually and is sourced directly from the manufacturer.
Usually ships within 4 - 14 days
This shave plate is a genuine MTD part, sold individually. This shave plate can be used as a replacement part in a snowblower. The purpose of the shave plate in a snowblower is to scrape up densely packed snow that might linger below the base of the appliance and get in the way of the operator while the snowblower is in use.The shave plate in a snowblower might need to be replaced if it can no longer efficiently and effectively serve its typical function. The shave plate might be dented, cracked, chipped, punctured, warped, or eroded and if this form of damage occurs, it should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is a genuine OEM from the manufacturer. It is sold individually. This shave plate is compatible with the following outdoor appliance brands: MTD.
This part is a spark plug that is used on a number of lawn and garden power equipment. A spark plug is used as part of an internal combustion engine. The spark plug delivers the electric current from the ignition system to the engine.A new spark plug may be needed after normal wear and tear over a period of time. The operator of the outdoor power equipment may notice that the engine misfires or it is difficult to start. If this is the case, a new spark plug will be needed. Never perform care and maintenance on outdoor power equipment that is powered on. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This spark plug is a genuine MTD part. It is sold individually. This particular spark plug is compatible with various outdoor power equipment that are manufactured by MTD, Yard Machines, Troy-Bilt, Bolens, Yard-Man, and Cub Cadet.
This part is a v-belt. A v-belt attaches the engine pulley to the transmission pulley, which is the system that moves the machine forward. This v-belt is approximately 21” long.A new v-belt may be needed if the original is showing signs of wear. The v-belt may become worn after years of normal use. Another sign that the v-belt needs to be replaced is if the operator hears squeaking during use. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Use caution and make sure to turn the machine off before attempting to make any repairs to it.This part is a genuine MTD part and is an OEM part sourced directly from the manufacturer and it is sold individually. This particular v-belt is compatible with snowblowers that are manufactured by MTD, Yard Machines, Troy-Bilt, Bolens, Husky, and Craftsman.
The snowblower auger driver belt is made from high-quality rubber and has a special design that features cogs. The belt is what will rotate the augers in the snowblower. Belts in snowblowers and other types of equipment tend to wear down over time and use. The belt might begin to stretch and no longer be able to rotate the augers. It could also crack or break. If any of these things happen to the belt, it would require a replacement before the machine could be used again. The belt is relatively easy to replace when the time comes. The genuine OEM snowblower auger driver belt is sold individually. It can be used with a number of models of snowblowers from Craftsman, Yard Machines, MTD, Huskee, and Cub Cadet. Whenever buying a new belt or any replacement parts, owners should always check to see that they are buying the correct option for their make and model.
This is a replacement skid shoe for Craftsman snowblowers. Ideally, when one shoe becomes so worn that it needs to be replaced, the other shoe should be replaced as well. Replacement is not difficult and should only require about half an hour. First, take out the key and disconnect the plug wire to prevent the machine from starting during repair. Remove the carriage bolts, nuts, and washers that hold the skid shoes in place. Replace the skid shoes. Ensure that the adjustable skids shoes are elevated enough that the snow blades will not collide with the ground during use. This will prolong the life of the shave plate. This OEM part fits a variety of different snowblowers made by Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man. Sold individually. The carriage bolts that hold the shoe in place may also need to be replaced and are sold separately.
The shear pin’s purpose is to stop the engine when it is broken. If the machinery hits something hard, the shear pin will break. This prevents injuries that could be fatal. If something large or small becomes clogged or jammed in the auger, the shear pin is meant to snap in half, rendering the auger useless. This happens once the auger reaches a certain point in pressure load, which also prevents damage to the rest of your equipment. The auger part of your machinery cannot turn without a shear pin. Since the purpose of the shear pin is to break on impact, it's a good idea to have several of these on hand for quick replacements. There’s nothing like having your equipment break down in the middle of a job. Repair is simple. Just remove the broken shear pin, line up the auger’s holes, and insert your new shear pin. Use the cotter pin to secure your shear pin. This genuine OEM auger shear pin works in conjunction with small engine equipment with augers made by Craftsman, Cub Cadet, MTD, Troy-Built, Yard Machines, and Yard-Man. This part is sold individually. Consider also ordering an MTD Pin-Bow Tie Cotter or retaining clip.
A cotter pin, also known as a hitch pin, is used to secure pins and shafts in place. Meant for snowblowers, riding lawnmowers, and lawn tractors, this bow-tie shaped cotter pin has a double-end design making it easy to pull or push through either side of a pre-drilled hole. This pin snaps into a locked position without tension, keeping it secure during operation. Designed for lawn and garden maintenance equipment, this part ensures secure fastening. If the power equipment is used frequently, cotter pins may have to be replaced regularly so it would be practical to keep extra bow tie cotter pins on hand. It is highly recommended that work gloves be worn during the installation of this part. This part is compatible with Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and MasterCut brands of lawn mower, snowblower, and log splitters. This is a genuine OEM replacement part that is sold individually.