Parts for Mtd 24A-452J706 / 2012: .Quick Reference Chipper Parts

This hopper collar is a genuine Husqvarna part, sold individually. This hopper collar can be used as a replacement part for a chipper shredder. This hopper collar affixes to the impeller housing and the hopper assembly as a protection and a cover to protect those internal components from damage.The hopper collar might have to be replaced at some point within the standard lifespan of the appliance if it suffers sufficient damage to merit a replacement. This could occur if the hopper collar is seriously punctured, torn, scratched up, or eroded from general wear and tear or as a result of a direct impact with a hard object that warps the component. If this occurs, the hopper collar should be removed and replaced by this genuine OEM replacement part. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This hopper collar is compatible with the following outdoor appliance brands: MTD, Craftsman, and Yard Machines.

This replacement part is a shredder bag assembly intended for use on lawn mowers. This part is able to catch grass clippings, mulch, and other debris during use. The bag attaches to the back of the mower and ensures that the debris is caught. A new shredder bag assembly might be needed if the current one is missing or is unable to hold the debris during use. Damage can include tears in the material, holes allowing debris to escape, or rips along the seams. Be sure the engine is powered down before attempting to replace this part. This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This is a chipper impeller assembly that can be used with a range of chippers and chipper-shredders. The impeller is the part of the chipper that rotates, and it is what allows for the chipping or shredding to take place. It will shred leaves, yard waste, and tree limbs. If there is an issue with the chipper impeller, it will reduce the efficiency of the machine. In some cases, it might not work at all. One of the signs that the impeller has problems is that it is turning slowly. It might also make a lot of noise.The impeller is a durable piece, but it does a lot of work. This means it is subject to wear and tear. Over time, it might become worn out or damaged, which will require a replacement. This replacement could be done by the owner. However, they need to remove the spark plug wire first and wear gloves to keep their hands safe.The chipper impeller assembly works for select machines from MTD, Troy-Bilt, Husky, and Yard Machines. This is a genuine OEM replacement part sourced from the manufacturer, and it is sold individually.

This is a chipper blade, which is installed on wood chippers and is used for cutting up pieces of wood into small chunks. Chipper blades need to be sharpened at least once a year or after about 25 hours of use. If the chipper blades aren't maintained, they will become dull and won't provide the required level of cutting power needed for wood chippers. If wood chips from the chipper are uneven, shredded, or rough, then sharpening or replacement may be needed. Make sure to take out the spark plug before the hopper is removed and connected to the tool. Next, remove the housing around the blades and the rotor assembly. The bolts around the blades can be taken off using an Allen wrench. Remove the blades, but be sure that work gloves are used to prevent injury. The replacement blade can be installed at this time. This is an OEM replacement chipper blade that can be used on wood chippers from Craftsman, MasterCut, Cub Cadet, Yard-Man, Yard Machines, and MTD. It's sold individually and comes directly from the manufacturer. The replacement will require an Allen wrench set, a wrench set, a socket set, and pliers.

A flail blade is a mechanism most often found in wood chippers and shredders. It is compatible with products by brands such as MTD, Troy-Bilt, Yard Machines, Cub Cadet, and Yard Man.The flail blade part is made out of what is commonly referred to as teeth or knives. The purpose of the flail blade is to serve the machine with the short pieces of metal attached to an axle that turns rapidly. A flail blade is capable of cutting grass and other plants. A flail blade can be mounted on the front, back, or side of outdoor machinery.This flail blade is made out of metal. This flail blade is an original OEM part sourced directly from the manufacturer, MTD. It is sold individually.

This three arm knob is an authentic OEM replacement part sourced directly from the manufacturer for use on lawn and garden machines as an adjustment handle, often for seat adjustment. The three sides of the knob make it easy to grasp and turn. The long threaded shaft ensures the knob is securely attached to the part it is used to adjust and has ample room for turning and adjusting. Over time, the plastic arms of the knob may deteriorate and crack making it difficult to turn. Cracks in the plastic can cause cuts and scratches. If the plastic breaks completely off, the handle will not be useable and should be replaced. If the plastic is broken, a pair of vise grips will be needed to remove the shaft of the handle. Once the handle is removed, line the threaded end of the handle up with the hole and turn it to tighten it in place. Don't over tighten as it could cause the threads to strip and not be usable.This three arm knob is a black plastic and metal part that is sold individually. It is designed for use in lawn and garden equipment that is manufactured by Husky, Craftsman, and Yard Machines.

This genuine MTD shredder screen determines the size of the shreds that the wood chipper will produce. A shredder screen covers any number of shapes and sizes of screens through which the wood will be chipped.A shredder screen might have to be replaced in the event that it suffers damage over time or in the case that the wood chipper encounters wood that is too hard or too brittle, which can break the shredder screen. The bars of a shredder screen can be welded back into shape by hand, but it is easier and safer to order a replacement shredder screen if it is subject to breaking, piercing, puncturing, or erosion to the metal material. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This shredder screen is compatible with the following brands: MTD, Cub Cadet, Yard Machines, Yard-Man, Craftsman, and Troy-Bilt. This part is sold individually.

A blade is the part of chippers and shredders that cuts the grass. It spins rapidly and pulls the grass up before cutting it. The grass is sucked into the deck, where the clippings continue to get chopped into smaller pieces before getting expelled. With regular use of the blade, after accidental damage, or because of the age of the machine, the blade may cease to perform adequately. Running the lawn equipment over rocks or other solid obstacles may also cause the blade to break. In any case, the blade has to be removed, and a new blade should be installed. Wear gloves for protection and handle the blade with caution. Make sure the machine is cooled entirely before beginning the repair.This blade is a genuine OEM part sourced directly from the manufacturer. It is made of durable, high-quality metal. The blade is sold as an individual unit. The replacement part is compatible with MTD, Troy-Bilt, Yard Machines, and Huskee brand lawn and garden machines, including chippers and shredders.

This is a spark plug that is installed on a variety of different outdoor power equipment. A spark plug is a component that delivers the electric current from the ignition system to the internal combustion engine. One spark plug is included in this package. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.The spark plugs can get dirty, and then they will require a replacement. Never perform care and maintenance on an appliance that is powered on.This spark plug is a genuine OEM MTD part. It is sold individually. This specific spark plug is compatible with snowblowers, lawnmowers, lawn tractors, log splitters, and blowers that are manufactured by MTD, Yard Machines, Troy-Bilt, Bolens, Yard-Man, and Cub Cadet.

This is a Briggs & Stratton Original Equipment 491588S Air Filter Cartridge. The purpose of this filter is to prevent dirt, dust, and debris from contaminating the carburetor and damaging the engine. This flat panel style, pleated paper air filter provides the first line of defense against the destructive effects of dirt ingestion. It is designed for 3.5 through 6.75 HP quantum engines and 625-1575 series engines. Over time, the air filter can get clogged or damaged, and this can lead to reduced engine performance. Locate the air filter cover, unscrew it, and remove the old filter. Make sure to clear out any debris that has found its way into the air filter assembly before inserting the new cartridge. Reattach the air filter cover and secure it with the screws. This replacement part works with generators, lawnmowers, pressure washers, wood chippers, and tillers. Aside from Briggs & Stratton, it is also compatible with specific products from Craftsman, Husqvarna, Lawn-Boy, Toro, Troy-Bilt, Simplicity, Snapper, and Wheel Horse. It is a genuine OEM replacement part and is sold individually.

This OEM replacement push cap can be used in a variety of lawn and garden equipment. The push cap is secured to the end of a shaft, providing protection to the user from the sharp metal edge of the shaft. The push caps that are included with the machines may wear out over time or fall off in some cases, creating an injury risk involving sharp metal edges. These push caps are high-quality and made from durable plastic. They are easy to install. The OEM push cap is a genuine part made by the original manufacturer, to ensure quality and s proper fit. The push caps can be used on lawn tractors, chippers, shredders, log splitters, and other equipment. Some of the brands that this push cap is compatible with include MTD, Husky, Yard-Man, Bolens, Troy-Bilt, Ryobi, Yard Machines, and cub Cadet.