Parts for Yard Machines 24A-464G729 / 2006: .Quick Reference Huskee Parts

The air filter cartridge cleans the air as it comes into the engine. It will remove any particles and debris, keeping the engine free from buildup and problems. The air filter will become dirty and clogged with regular use and needs to be replaced as a part of routine maintenance. This is typically done once or twice a season, depending on frequency of use. It may be necessary to replace intermittently if there is an emergency issue. Air filters cannot be cleaned and should always be replaced with a genuine OEM replacement. This OEM air filter can be used with Briggs & Stratton engines in select lawn mowers and blowers from Toro, Husqvarna, and Briggs & Stratton. This pleated paper filter includes a plastic frame. The foam pre-filter cleaner is sold separately, and this cartridge is sold as an individual unit. Air filter replacements require no tools, but it is important to allow the engine to cool completely and wear gloves when performing maintenance and repairs.

This hopper collar is a genuine Husqvarna part, sold individually. This hopper collar can be used as a replacement part for a chipper shredder. This hopper collar affixes to the impeller housing and the hopper assembly as a protection and a cover to protect those internal components from damage.The hopper collar might have to be replaced at some point within the standard lifespan of the appliance if it suffers sufficient damage to merit a replacement. This could occur if the hopper collar is seriously punctured, torn, scratched up, or eroded from general wear and tear or as a result of a direct impact with a hard object that warps the component. If this occurs, the hopper collar should be removed and replaced by this genuine OEM replacement part. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This hopper collar is compatible with the following outdoor appliance brands: MTD, Craftsman, and Yard Machines.

This genuine MTD shredder screen determines the size of the shreds that the wood chipper will produce. A shredder screen covers any number of shapes and sizes of screens through which the wood will be chipped.A shredder screen might have to be replaced in the event that it suffers damage over time or in the case that the wood chipper encounters wood that is too hard or too brittle, which can break the shredder screen. The bars of a shredder screen can be welded back into shape by hand, but it is easier and safer to order a replacement shredder screen if it is subject to breaking, piercing, puncturing, or erosion to the metal material. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This shredder screen is compatible with the following brands: MTD, Cub Cadet, Yard Machines, Yard-Man, Craftsman, and Troy-Bilt. This part is sold individually.

This is a Briggs & Stratton Original Equipment 491588S Air Filter Cartridge. The purpose of this filter is to prevent dirt, dust, and debris from contaminating the carburetor and damaging the engine. This flat panel style, pleated paper air filter provides the first line of defense against the destructive effects of dirt ingestion. It is designed for 3.5 through 6.75 HP quantum engines and 625-1575 series engines. Over time, the air filter can get clogged or damaged, and this can lead to reduced engine performance. Locate the air filter cover, unscrew it, and remove the old filter. Make sure to clear out any debris that has found its way into the air filter assembly before inserting the new cartridge. Reattach the air filter cover and secure it with the screws. This replacement part works with generators, lawnmowers, pressure washers, wood chippers, and tillers. Aside from Briggs & Stratton, it is also compatible with specific products from Craftsman, Husqvarna, Lawn-Boy, Toro, Troy-Bilt, Simplicity, Snapper, and Wheel Horse. It is a genuine OEM replacement part and is sold individually.

This is a spark plug that is installed on a variety of different outdoor power equipment. A spark plug is a component that delivers the electric current from the ignition system to the internal combustion engine. One spark plug is included in this package. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.The spark plugs can get dirty, and then they will require a replacement. Never perform care and maintenance on an appliance that is powered on.This spark plug is a genuine OEM MTD part. It is sold individually. This specific spark plug is compatible with snowblowers, lawnmowers, lawn tractors, log splitters, and blowers that are manufactured by MTD, Yard Machines, Troy-Bilt, Bolens, Yard-Man, and Cub Cadet.

This is a replacement flail blade that is used with various models of chippers and shredders. The purpose of the flail blade is to rotate so it can shred grass and other types of debris. The blade will attach to the impeller assembly. It will help to break down the material, as long as it is in good condition. The flail blade works hard, and it is sometimes in contact with materials that could cause damage. The blade could become bent or broken. In some cases, it could become corroded and rusty. When the flail blade is in poor condition, it will no longer work as efficiently or effectively as it once did. If they are no longer in good condition, owners will want to replace the flail blades on their machines as soon as they can. This is a genuine OEM replacement flail blade. It is sold individually, but machines may require more than one. Buyers should consider replacing them all at the same time. The blades are used specifically for chippers and shredders. They are compatible with models from Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, MTD, Yard-Man, and MasterCut.

This OEM replacement push cap can be used in a variety of lawn and garden equipment. The push cap is secured to the end of a shaft, providing protection to the user from the sharp metal edge of the shaft. The push caps that are included with the machines may wear out over time or fall off in some cases, creating an injury risk involving sharp metal edges. These push caps are high-quality and made from durable plastic. They are easy to install. The OEM push cap is a genuine part made by the original manufacturer, to ensure quality and s proper fit. The push caps can be used on lawn tractors, chippers, shredders, log splitters, and other equipment. Some of the brands that this push cap is compatible with include MTD, Husky, Yard-Man, Bolens, Troy-Bilt, Ryobi, Yard Machines, and cub Cadet.